Question about Dynex DX-E401 Router

1 Answer

Trying to share internet connection

Trying to connect 2 computers 1 connection through time warner the computer says I'm connected but i'm getting errorr message not connected

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 60 Answers

Make sure that the modem is connected to the internet port of the router and the pc should be connected to the numbered ports. Now power cycle the network, turn off the router first then the modem. Wait for 3-5 minutes then turn on the modem and router.

Posted on Jun 29, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I cannot get internet on my laptop from an open access point with Time Warner internet


Hello,

Though you are getting strong signals from the router, the router itself may not be connected to the Internet. The owner may leave the router on but power off the modem. It is possible that they may use the router for thier own private network with no connection to the Internet. When you connect to the router, check your network and sharing center to see if you see an X marked on the connection between the router and the Internet. If you do, the router is not connected to the modem.

Good Luck
C2Solutions

Feb 14, 2012 | Computers & Internet

Tip

How To share a ADSL Connexion with 2 computers


Introduction


51e843c.jpg
It is about sharing the ADSL connection from PC1
(Server) with PC2 (Client).
Assume that the connection to the Internet
configured correctly in the PC1.



* ) Hardware Requirements

A PC running Windows XP and equipped with a network card
(Server).
Internet access.
A second PC with a network adapter (client PC).
RJ45 crossover cable



*)Configuring Server Side

1. Assign an IP address
Click on Start / Control Panel / Network Connections
and Internet



805df3a.jpg

Double click the Network Connections icon
get a new window



f086806.jpg

Click on the icon Local Area Connection with the right button
your mouse and select Properties. A new window appears



506ce5f.jpg
Double click on Internet Protocol (TCP / IP) a new window
appears


cac8b24.jpg
2. Share the connection.
Back in the Control Panel and select
Connections.
Then in the window that opens right click
your Remote Access (for example ADSL) and select
Properties option.


d65b699.jpeg
A new window appears:


3db9047.jpg
Select the Advanced tab under Connection Sharing
Internet check Allow other network users to
connect through this computer's Internet connection and the
Establish a connection box Dial whenever
computer attempts to connect to internet and confirm by clicking
OK. A new window will open:

101bdc9.jpg

To Continue Click Here : .....More

on Jul 15, 2010 | Computers & Internet

2 Answers

How do i set up internet on a dell computer we just got? have a modem and time warner internet...HELP!


Plug in the cable from the wall into the modem.You need an ETHERNET wire to connect from the modem to the back of the computer.It is yellow,universal,and you should have received one from Time Warner.It will fit in only 1 spot on the modem and only 1 spot on the computer.I also have a Dell.Good luck if you EVER have to call for technical support.One time I called,they asked me to say and spell my first namke.G-r-e-g-o-r-y.She replied,ok let me read that back to verify it.Now that's T as in Tom...They have an accent,it is eastern,but much farther than New England to Florida.Good luck! Greg

Oct 27, 2010 | Computers & Internet

1 Answer

How do i share internet with others when I suscribe to internet I was told when I signed up with Tmo that windows settings allow you to share connection.


Windows Settings allow you to share your internet connections providing you have 2 network connections IE: 2 X Ethernet cards 1 X Ethernet Card 1 X Wireless Card. Then on the computer you want to "share" the internet on click on control panel /Network then right click on the card that is connected to the internet you want to share. got to Properties then advance . Tick the box "Allow network users to connect through this computers internet connection" Reboot that PC and any pc connected to that PC either by network cable or wireless will be able to use the internet

Jul 24, 2010 | Dell Inspiron Mini 10 Notebook

1 Answer

Modem light keeps blinking Have tried resetting. Restoring to default settings. If I hook the computer directly to the time warner modem I can acces the internet fine. Thanks


If the modem light keeps blinking, it means that the router hasn't been configured yet. Also, rarely, it can be an issue with WAN port/modem port on the router or the ethernet cable connecting the modem to router or finally, modem may not be working as its not applicable in this case(as you said).
How to configure the router for Time Warner?
1.Connect comp.--(gray port) router (yellow port)--modem
2.On the computer, open the router page by typing 192.168.2.1 in the address bar of browser
3.Under Internet Settings, change the connection type as Dynamic.
4.On the far left column, click on "MAC address" under Internet WAN.
5.Click on clone and apply changes and finally check Internet status
6.If internet status > Not connected, we need to do a network power cycle
7.For this, unplug the power from router, then from modem, then unplug the coaxial cable from cable modem.
8. Wait for 10 sec, then connect the coaxial cable, then connect power to modem, wait for lights on modem to get steady, then finally, plug in the power to router.
Now, you may see proper lights lit on the router.
All my best wishes for a fast internet service through the router.

For any advanced help, revert asap!
Thanks and regards,
Arvind

Jul 04, 2010 | Belkin F5D8236-4 Router

1 Answer

Connection issue


Hi! I believe your having some issue with your router and I will be more than glad to assist you in this concern..Time warner cable is your isp and if the computer is connected directly to the modem, you have a perfect internet connection but if you are going to connect the cable from your modem to the router and you connect your computer to port 1 to 4 of your router it will not give u an internet connection. This is what we are going to do.
1. connect your computer that can get an internet connecttion thru time warner cable to the router on port1.
2. pull up a browser and type in the default gateway of the router, to check the default gateway of the router, right click the network icon on the lower right of the task bar and click status and it will show the ip address, subnet and default gateway, ex the default gateway is 192.168.1.1, u are going to type in the default gateway ip address to the url of the browser.
3. It will ask u for the username and password, by default the username is admin and the password is 1234 or just leave it blank.
4. It will pop up the setup page of the router and you have to look for the setting for doing a mac clone, you need to clone the mac address of your pc that can connect to the internet thru time warner cable modem.
5. once its done, save the settings and on the internet connection settings, manualy configured it to auto-dhcp. save the settings.
6. once its done..unplg the power of the computer, router and modem.
7. cable connection should be, cable from the modem goes to the WAN port of the router and connect cable on port 1 of the router to your computer on the lan port.
8. Plug in 1st the power of the cable modem, once all lights are lit then plug in the power of the router, once all lights are solid on the router, like the power, WAN, u will notice that there is no light on the port1, computer is still off, once the computer is on port1 will lit, then power on the computer..once computer is completely boot up, pull up a browser and it should gives u an internet connection.
9. Once you have an internet connection, u can access again the setup page of the router to setup the wireless connection settings.
10. If you are going to connect another to the existing router that is conneted to the time warner cable. that is possible, but before u connect the 2nd router to the 1st router..
a. connect the 2nd router to a computer to set it up..you have to access the setup page of the 2nd router.
b. once you access the setup page, there is a menu for the lan settings that is for the router side. u need to change the 3 octet of the ip address of the 2nd router. ex your 1st router ip address is 192.168.1.1 and the 2nd router ip address is 192.168.1.1 to change the 3 octet of the 2nd route, the 2nd router ip address should be 192.168.2.1. then save the settings..
c. the router will reboot and need to access the setup page of the router by using the 192.168.2.1 and u can set the wireless connection settings.. once its done..
d. cable connection should be---cable from the time warner cable goes to the WAN port of the 1st router, connect a cable to port 4 of the 1st router going to the WAN port of the 2nd router.. this process is called cascading two routers on a network.. this should work.. good luck

Aug 16, 2009 | ViewSonic (DHWMG120) Router

1 Answer

I have a Brother HL2070N printer. I have 2 computers and want to share the printer. I connected the printer via the USB port to Computer 1 and it prints fine. I set the printer to SHARED. Computer 1 has...


hi there,

Because printers and networks vary, the best instructions for setting up and networking your printer should be in its users manual. Also, your network-ready printer may have come with installation software that can help you share the printer over the network.

There are three main steps you need to take when networking a printer, including the following: Enable the File And Printer Sharing setting, Make the printer available to all users, and Direct PCs to the printer.

For detailed instructions on sharing printers at home, please refer to the "Get Your House In Order" article in the "See Also:" section below.

For detailed instructions on sharing printers in a small business, please refer to the "Select & Share The Right Printer For Your Small Business"

Apr 14, 2009 | Brother Office Equipment & Supplies

1 Answer

I have Time Warner Cable for internet and Vontage cable for my phone thru my internet. I'm trying to connect a Linksys router for my wireless laptop. I also have a Netgear switch connected to Time Warner...


If you purchased a Linksys wireless roter then you shoul not need the switch anymore-
Try going directly from your time warner modem into the Interner/WAN port on the router and then plug your desktop computer and the vontage phone system into 2 of the ports on the router. After everything is hooked up you will probably need to power cycle for it all to work correctly.
Please power cycle in this order:

Reboot modem - then Router- then Vontage phone system.

Hope this helps

Apr 09, 2009 | Linksys -Cisco Wireless-G VPN Broadband...

1 Answer

Limit or no conectivity problem


I understand that you are using the Windows Internet Connection Sharing to share your internet connection to your other computer.

If you don't have a router to share the connection then you are using Windows ICS connection.

When you enable ICS, the network adapter connected to the local area network is assigned a static IP address of 192.168.0.1.

You can check this site for more information
http://www.annoyances.org/exec/show/ics_xp

You can try to connect the two computers first without the internet connection.

Example : PC A 192.168.0.2
You can set the IP addresses manually, just set the tcp/ip properties and from that area you can set the IP address manually.

And for PC B 192.168.0.3
You dont need to set the ip address for the gateway and dns since you are just testing the connection of the two computer.

They should belong to the same workgroup example HOME and set the computer name to PC1 and PC2.

You can right click MY COMPUTER then select PROPERTIES then you will able to see the computer name.

To start the wizard
1.
Choose Control Panel from the Start menu.
2.
Click Network and Internet Connections, and then click Set up or change your home or small office network.


http://www.smallbusinesscomputing.com/webmaster/article.php/3293481

http://www.homenethelp.com/connection-sharing.asp


http://practicallynetworked.com/sharing/xp_ics/

Mar 05, 2008 | Computers & Internet

2 Answers

Can't connect to 3Com Office connect wireless from Apple Mac Pro


PPPoE connection is set up

1. Control Panel, double-click Network Connections. 2. Click the PPPoE connection under the Broadband group that you want to share, and then click Change settings of this connection under Network Tasks. 3. On the Advanced tab, click to select the Allow other network users to connect through this computer's Internet connection check box. 4. PPPoE connections behave in a similar way as do dial-up networking (DUN) connections, and you may want the connection to be automatically dialed when another computer on your network attempts to connect to the Internet. To do this, click to select the Establish a dial-up connection whenever a computer on my network attempts to access the Internet check box. 5. If you want to allow other network users to enable or disable the shared Internet connection, click to select the Allow other network users to control or disable the shared Internet connection check box. 6. Under Internet Connection Sharing, in Home networking connection, click the LAN (Local Area Network) connection that connects the computer that is sharing its PPPoE Internet connection to the other computers on your network.

Feb 07, 2008 | 3Com OfficeConnect Wireless 11g Cable/DSL...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dynex Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Prashant M
Prashant M

Level 3 Expert

2260 Answers

micky dee

Level 3 Expert

2888 Answers

Are you a Dynex Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...