Question about Zenith D60WLCD 60" Rear Projection HDTV-Ready Television

1 Answer

Zenith D60WLCD LAMP INDICATOR START BLINKING IN RED AND TV GO OFF

Hi, my model tv is D60WLCD, IN THE CONTROL PANEL THE LAMP INDICATOR START TO BLINK, AFTER THE TV IS ON FOR A FEW MINUTES AND THEN THE TV GO OFF, WHAT DOES THIS MEAN? DO i HAVE TO REPLACE THE LANP/ PLEASE HELP, DON'T HAVE ANY OTHER PROBLEM BUT THAT ONE. PLEASE ADVICE ME WHAT TO DO HERE.

Posted by on

  • 1 more comment 
  • Mark Feb 14, 2008

    I have the EXACT same problem. The manual says that this error means "The projection has trouble in the lamp or around it. Contact service center."

    Will replacing the lamp fix the problem?

  • Michelle Ashlee Oct 08, 2013

    I have had the same issue, I bought a replacement lamp and installed it within the existing casing, the tv worked without issues for a few days and now will only turn on for few minutes if at all. I am not trying to purchase new plug in wires as well as the replacement lamp to see if it is possibly a short in the wires.

  • Michelle Ashlee Oct 08, 2013

    * I am now trying*

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 208 Answers

This sounds like a lamp failure. See your owners manual for instructions on replacing the lamp.

Posted on Feb 10, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Zenith D60WLCD, I have replaced the lamp and it still will not power up. I there something I need to reset.


You need to reset the lamp counter if it reaches 16,000 hours. The tv will not turn on once this limit is reached. With the tv remote, and the tv off, push the ? Button on the remote, then 9876, then push the enter button. The three lights on the front panel will flash indicating the counter has reset.

Dec 11, 2012 | Zenith D60WLCD Television

1 Answer

How do I reset the replace lamp indicator light on my zenith d60wlcd tv ?


With the tv remote, and the tv off, push the ? Button on the remote, then 9876, then push the enter button. The three lights on the front panel will flash indicating the counter has reset.

Aug 30, 2012 | Zenith D60WLCD Television

1 Answer

I need to reset lamp timer on zenith d60wlcd


With the tv remote, and the tv off, push the ? Button on the remote, then 9876, then push the enter button. The three lights on the front panel will flash indicating the counter has reset.

Jun 29, 2012 | Zenith D60WLCD Television

1 Answer

Need to reset lamp timer on zenith d60wlcd please help


With the TV off, use the TV remote to press the "?" Button and then enter 9876 and then the enter button. The three lights on the front panel will flash, indicating the lamp counter is reset.

Oct 31, 2011 | Zenith D60WLCD Television

1 Answer

Zenith E44W46LCD TV power/operation indicator lamp blinks green then goes red when power switch pressed. I can hear the fan motor but no picture. No history of lamp indicator warning.


If the tv projection lamp already been inside the tv now like a 1 1/2 or 2 years?Tv used it every day like 4 or 5 hrs every days?Yes?Than it is the tv projection lamp have to be replace,because the tv projection lamp life span have ended.

Sep 04, 2011 | Zenith E44W46LCD 44" Rear Projection...

1 Answer

TV turns off after about a minute flashing red light on lamp indi


your tv is talking to you basically, is telling you that the lamp has to be replaced. this is a common problem with this dlp tvs, when the lamp is bad the shuts off within minutes, so just replace the lamp my friend.

May 26, 2009 | Zenith D60WLCD Television

2 Answers

Zenith zn620 universal remote


Hi,
This may be of help for Zenith codes:

http://www.thompsontv.com/zcodes.html

Jul 20, 2008 | Zenith ZN620 Remote Control

1 Answer

Lamp indicator blinks red


There is a problem with the lamp or around it? When it turns Orange, the lamp is at or near the end of it's life & needs replacing. What does the temperature indicator show? Orange, Red or Red Flashing? If not, then there is probably accumulated dust around lamp area

Dec 24, 2007 | Zenith E44W46LCD 44" Rear Projection...

2 Answers

Toshiba 62HM14


What are the labels on the lights? Timer/Lamp/Service and what color is wich?

Jun 03, 2007 | Toshiba TheaterWide 62HM94 62" Rear...

Not finding what you are looking for?
Zenith D60WLCD 60" Rear Projection HDTV-Ready Television Logo

Related Topics:

310 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zenith Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75178 Answers

matt martin
matt martin

Level 3 Expert

1213 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Are you a Zenith Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...