Question about Kenmore Washing Machines

1 Answer

Monitor displays HC at end of cycle - Kenmore Washing Machines

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

This HC error code will appear at the end of the wash cycle to indicate that the hot and cold water inlet hoses are switched. If the hoses are not switched it could indicate a problem with the Electronic Control Board. You can try to rest the washer by unplugging or flipping the breaker to the washer fo 2-5 min. Restore power to the washer and try running a short cycle. This will help clear any irregularities that the control board may have encountered.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Posted on Sep 11, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does the message HC mesn ?


it means your hoses are reversed just switch the hoses around

Mar 16, 2017 | Washing Machines

1 Answer

HC error code....have not touched the hoses since it was installed...?


This HC error code will appear at the end of the wash cycle to indicate that the hot and cold water inlet hoses are switched.
If the hoses are not switched it could indicate a problem with the Electronic Control Board.
You can try to rest the washer by unplugging or flipping the breaker to the washer for 2-5 min.

Restore power to the washer and try running a short cycle. This will help clear any irregularities that the control board may have encountered.

Thanks for using FixYa

Aug 05, 2011 | Maytag Bravos MVWB700V Top Load Washer

1 Answer

I have Maytag Bravos washer, which displays an HC code at the end of the wash cycle. However, it has been working fine for months, and the hoses are in the correct places. What should I do?


Hi,
Apparently your hoses are switched, it means you rinse cycle is pumping in hot water instead of cold. Turn off the water to the washer, switch hoes connections to washer or the wall, not both. This should fix the problem..
Good Luck

I’m happy to help further over the phone at https://www.6ya.com/expert/gere_bf68e6055dd61249

Jul 15, 2011 | Maytag Bravos MVWB400V Washer

1 Answer

Code HC is appearing on the digital display?


This HC error code will appear at the end of the wash cycle to indicate that the hot and cold water inlet hoses are switched. If the hoses are not switched it could indicate a problem with the Electronic Control Board. You can try to rest the washer by unplugging or flipping the breaker to the washer fo 2-5 min. Restore power to the washer and try running a short cycle. This will help clear any irregularities that the control board may have encountered.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question(())

May 27, 2010 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

Why is my kenmore elite (top loader) oasis washer HE is displaying a code of HC


The water inlet hoses are probably removed and reconnected in reverse, and then trigger the HC error code to flash indicating the hot and cold water inlet hoses are reversed. Reconnect the water inlet hoses properly and start a cycle then let us know what happens next.

Apr 18, 2010 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

Code hc


This HC error code will appear at the end of the wash cycle to indicate that the hot and cold water inlet hoses are switched. If the hoses are not switched it could indicate a problem with the Electronic Control Board. You can try to rest the washer by unplugging or flipping the breaker to the washer fo 2-5 min. Restore power to the washer and try running a short cycle. This will help clear any irregularities that the control board may have encountered.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Jan 15, 2010 | Kenmore Oasis HE 27082 Top Load Washer

3 Answers

What does HC stand for?


According to the Whirlpool "Cabrio" washer installation and maintenance manual, (Cabrio is the Sears Oasis) the HC code will come up when.

"
“HC” (Cold and Hot hoses switched)
This code will appear at the end of the wash
cycle to indicate that the cold and hot water
inlet hoses are switched. If an error code
does not appear, but you are experiencing
poor washing performance, check to see
whether the inlet hoses are reversed. See
“Connect the Inlet Hoses.”
"

Sep 24, 2009 | Kenmore Oasis HE 27082 Top Load Washer

1 Answer

It comes up with a code of HC after completing the cycle and now i have water underneath the machine


This HC error code will appear at the end of the wash cycle to indicate that the hot and cold water inlet hoses are switched. If the hoses are not switched it could indicate a problem with the Electronic Control Board. You can try to rest the washer by unplugging or flipping the breaker to the washer fo 2-5 min. Restore power to the washer and try running a short cycle. This will help clear any irregularities that the control board may have encountered.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Sep 14, 2009 | Kenmore Washing Machines

1 Answer

What is the HC code for the washer . It comes on after the wash cycle is finished.


After replacing the part to fix the F1 code, the washer (Oasis he) now comes up with a HC code. Also, even though the cycle is set for warm/cold, the clothes are coming out hot at the end of the cycle...and the cold water is hooked up and on. Any suggestions?

Sep 08, 2009 | Kenmore Oasis HE 27082 Top Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

116 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Sal De

Level 3 Expert

2699 Answers

fordexpert

Level 3 Expert

5687 Answers

Jim Goldsmith
Jim Goldsmith

Level 3 Expert

2005 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...