Question about Frigidaire GLWS1339CS Top Load Washer
Washing machine goes through whole washing cyle without draining.
Posted on Mar 27, 2008
The most common cause of machines stopping mid cycle is not draining. Your machine should have a filter behind the kick plate at the bottom.
If this is not the case please post back for further assistance.
Posted on Jan 22, 2009
your timer is most likely bad
Posted on Apr 20, 2009
more than likely the pump needs replacing, first of all remove the outlet drain hose from the the place it discharges and lower it into a bucket,this should allow it to syphon away,you may need to empyt the bucket a few times once the machine is empty you should be able to put it on its spin cycle once it has spun locate and remove the filter to remove any objects or lint, fill machine with warm water and try to drain and spin via the programme,if this do not work fit a new pump
Posted on May 29, 2009
when it reaches the stopping point does it stop after the wash cycle if so try pushing the switch to the lid with a popsicle stick and see if it goes into the spin cycleif it does the lid switch is bad. the washer will not go into the spin cycle unless the lid is closed and if the swich is bad it won't let the time advance
Posted on Aug 12, 2009
Tips for a great answer:
Feb 16, 2013 | Washing Machines
Oct 24, 2008 | Kenmore 15864/15862 Top Load Washer
May 13, 2011 | Washing Machines
Aug 15, 2010 | Frigidaire ATF6000ES Front Load Washer
Aug 12, 2009 | Frigidaire FWS933F Top Load Washer
Aug 12, 2009 | Whirlpool WTW5800SW
Sep 22, 2008 | Whirlpool Washing Machines
May 23, 2008 | Kenmore Washing Machines
Apr 21, 2008 | Maytag Dependable Clean Top Load Washer,...
Nov 08, 2006 | Roper RAS8445KQ Top Load Washer
166 people viewed this question
Usually answered in minutes!