Question about Bosch Nexxt 500 WFMC3301 Front Load Washer

1 Answer

I have a Bosch Nexxt® 300series Front Load Washer. It is 7 months old and I have always used HE detergent in small quantity. I am now getting an E-13 error code. I have ran the drain program and the drain line is clean and unclogged. Can you help?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 82 Answers

Dont mess with it your self bosch have a 2 year parts and labor phone then and it will be fixed free of charge it sound like the pump

Posted on Jun 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I eliminate mildew from Bosch front loader washing machine? I've tried all standard remedies. I leave the door ajar after each wash load.


There is a product specifically for this issue, called washing machine cleaner. It is different from laundry detergent. You need to run the cleaner through monthly, and your issue should resolve.
Newer machines allow client to drain the water, attempting to address this issue, but I think the cleaner is required, or you do not get the mildew smell resolved.
Doc

Aug 04, 2011 | Bosch Nexxt 100 Series WFMC1001UC Front...

1 Answer

Which slot do you put liquid detergent in?


If it is fabric conditioner, then use the smallest compartment, if washer detergent, then use the largest compartment.

Aug 14, 2010 | Bosch Nexxt 500 WFMC3301 Front Load Washer

4 Answers

The rubber seal at the front of the machine has gone mouldy. I have cleaned it before with bleach but the mould comes back all the time


Front loaders are known for building up mold and the smell.
It’s caused by using liquid detergent which is made from animal fat. Use powder. And use the minimum amount.
It’s caused by using fabric softener. Dilute it 50/50 with water.
It’s caused by the water remaining in the tub between washes. Leave the door open to allow it to dry. .

Oct 21, 2009 | Bosch Nexxt 700 Series WFMC6401UC Front...

3 Answers

Bosch Nexxt 800 Washer Distugsting Smell


USING NON BIOLOGICAL DETERGENTS AND LOW TEMP WASHES WILL EVENTUALLY LEAVE GUNK IN DRUM AND AROUND DOOR SEAL TRY USING BIO DETERGENT HOTTER COTTON WASHES AND THE OCCASIONAL 90 DEGREE WASH

Aug 08, 2009 | Bosch Nexxt Premium WFMC6400UC Front Load...

1 Answer

Bosch 300 Nexxt won't use detergent on cold cycles


Make absolutely sure you have the hoses connected to the correct inlet valves,it sounds to me as though they are the wrong way round.
Plz rate my solution.
Thanks.

Dec 29, 2008 | Bosch Nexxt 300 Series WFMC2201UC

2 Answers

Washer will not spin


Carbon brushes in motor have worn down clean armture and replace brushes.

Nov 26, 2008 | Bosch Nexxt Premium WFMC6400UC Front Load...

1 Answer

Bosch Nexxt series washer - water in softener dispenser


Hi. Remove dispenser, and thouroughly clean.
This should solve problem. If problem persists, don't worry about it tomuch, as long as it takes the conditioner down that is the main thing.

Nov 23, 2008 | Bosch Nexxt 100 Series WFMC1001UC Front...

1 Answer

Clothes too wet upon cycle completion...


Try reducing the amount of low sudsing detergent you are using. This can make the load too heavy and won't spin out. Remember suds have 3 parts, air, detergent, and water. The drain pump is designed for water, so if you see suds during the wash, it will be worst on warm and hot, then there is too much detergent, or is not low sudsing. I know Bosch reccommends HE, however HE liquids normally are not low sudsing, just High Engery. Also the Permanent Press cycles are always a lower spin speed. Hope this helps

Jan 20, 2008 | Bosch 3.81 cu ft WFMC530 1UC Nexxt 500...

1 Answer

Not draining


Clean out the lint draw and then run vinegar through a cycle.
If this doen't work try CLR. or/and put the drain hose to the lowest level and then put a flexible clear tube down to unblock it.
Use less detergent in the machine. I make my own detergent and I don't have any problems as one of the ingredients in it help keep all lines clear.
If that doesn't solve the problem contact Bosch directly.

Jan 08, 2008 | Bosch Nexxt 700 Series WFMC6401UC Front...

Not finding what you are looking for?
Bosch Nexxt 500 WFMC3301 Front Load Washer Logo

496 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bosch Washing Machines Experts

Tim Whalen

Level 3 Expert

3074 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Are you a Bosch Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...