Question about Kenmore 46462 Front Load Washer

Open Question

My kenmore 11020022013 top load washing machine went off balance and now it wont work and the green spin light is blinking

I have tried unplugging it and no change

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 11 Answers

SOURCE: Kenmore Waher spin cycle out of balance

Sounds like your front to back spring is pulling to tight, sometimes you need to replace it and sometimes you can take it off and stretch it. hope this helps

Posted on May 20, 2007

Ad
  • 240 Answers

SOURCE: Kenmore Front Load 3.5 cu ft Washing Machine, NO SPIN CYCLE

is it in a diagnostic mode? unplug from wall for 15 sec or so and try again.

Posted on Jun 03, 2008

  • 67 Answers

SOURCE: Pounding noise after wash and final spin

  • The spin bearing or basket drive may be worn or seized. These components allow the inner tub to spin freely inside the outer tub. When this is the problem, you usually hear a loud sound during the spin cycle. Call a qualified appliance repair technician.

    if this helps please give a fix ya vote
  • Posted on Jul 14, 2008

    • 1 Answer

    SOURCE: washing machine will not spin

    MY WASHER WANT SPIN AT ALL

    Posted on Nov 15, 2008

    • 224 Answers

    SOURCE: my washing machine will not spin or agitate

    Does the washing machine empty as normal? I am assuming it does and think the brushes on the motor could be worn. Hope this helps.

    Posted on Jan 20, 2009

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    1 Answer

    Kenmore Series 70 Washing Machine - won't drain water


    WHAT IS WRONG WITH YOUR WASHING MACHINE?

    small_11_21.jpg For a detailed Washing Machine illustration, click below.

    redarrow.gif Top Load Maytag Style
    redarrow.gif Top Load Whirlpool Style
    redarrow.gif Top Load GE Style
    redarrow.gif Front Load Maytag Style
    redarrow.gif Front Load Frigidaire/GE/Kenmore Style
    Warning! To avoid personal injury or even death, always disconnect your appliance from its power source--that is, unplug it or break the connection at the circuit breaker or fuse box--before you do any troubleshooting or repair work on your appliance. Also, because some components may have sharp edges, use caution while working on your appliance.

    Some problems that can occur with your top-loading washing machine are:

    There's an error code on the digital display

    It doesn't work at all
    It won't drain
    It doesn't spin
    It doesn't agitate
    It's noisy
    It leaks
    It's off balance
    There's no hot water
    There's no cold water
    It's slow to fill
    There's no water at all
    The clothes are wet after spinning
    The cycle doesn't advance
    There's no delicate or regular spin or agitate
    It's overfilling
    It's underfilling
    The water temperature is incorrect


    Hope this may help;

    DON'T FORGET TO RATE:

    Aug 10, 2008 | Washing Machines

    1 Answer

    Haier HLP21E Top Load washer keeps beeping & blinking after water intake. It will rinse out the water when 'rinse' pressed. However it does not 'spin' but instead all three orange lights start blinking &...


    No spin with alarm means the unit is out of balance.
    The troubleshooting manual reads:
    "The safety switch acts. The
    spinning cannot work (The
    WASH, RINSE and SPIN
    indicator flash and alarm goes
    off every 10 seconds). If
    trouble cannot be solved after
    alarming, it will alarm again
    every few minutes."

    To solve this the load must be balanced:

    Make sure to level the machine on a solid floor. Also you may have to redistribute the clothing in the tub for even weight distribution.

    Sep 28, 2013 | Haier HLP21E Top Load Washer

    1 Answer

    Spins out of balance even emty


    http://www.askmehelpdesk.com/plumbing/whirlpool-out-balance-spin-cycle-18991.html
    http://fixitnow.com/sbrvrs/washers.htm

    http://www.repairclinic.com/Washing-Machine-Troubleshooting


    This model of washer does not have an out of balance cut off switch. If the load is not balanced properly the tub could hit the cabinet sides. If the unit spins evenly while empty & out of balance while loaded, I recommend checking & balancing the load. If the basket spins out of balance while empty, I recommend having the suspension springs & balance ring checked. Be sure not to wash light fabric with heavy fabric clothes. Also ensure that the adjustable feet are level, that's most important.

    Aug 01, 2010 | Kenmore 24032\24036 Top Load Washer

    1 Answer

    Buzzer went off because clothes were off balance now machine will


    Needs new motor coupler, Go to appliance guru web site for details on how to replace it

    Jan 01, 2009 | Kenmore 24032\24036 Top Load Washer

    1 Answer

    Whirlpool Duet Front Load Washer


    WHAT IS WRONG WITH YOUR WASHING MACHINE?

    small_11_21.jpg For a detailed Washing Machine illustration, click below.

    redarrow.gif Top Load Maytag Style
    redarrow.gif Top Load Whirlpool Style
    redarrow.gif Top Load GE Style
    redarrow.gif Front Load Maytag Style
    redarrow.gif Front Load Frigidaire/GE/Kenmore Style
    Warning! To avoid personal injury or even death, always disconnect your appliance from its power source--that is, unplug it or break the connection at the circuit breaker or fuse box--before you do any troubleshooting or repair work on your appliance. Also, because some components may have sharp edges, use caution while working on your appliance.

    Some problems that can occur with your top-loading washing machine are:

    There's an error code on the digital display

    It doesn't work at all
    It won't drain
    It doesn't spin
    It doesn't agitate
    It's noisy
    It leaks
    It's off balance
    There's no hot water
    There's no cold water
    It's slow to fill
    There's no water at all
    The clothes are wet after spinning
    The cycle doesn't advance
    There's no delicate or regular spin or agitate
    It's overfilling
    It's underfilling
    The water temperature is incorrect


    Hope this may help;

    DON'T FORGET TO RATE:

    Aug 10, 2008 | Whirlpool Duet GHW9150P Front Load Washer

    1 Answer

    Kenmore Front Load 3.5 cu ft Washing Machine, NO SPIN CYCLE


    is it in a diagnostic mode? unplug from wall for 15 sec or so and try again.

    May 15, 2008 | Kenmore Elite 45986 Front Load Washer

    1 Answer

    Kenmore 46462 powers off during spin cycle - no lights


    i cleaned out the pump under the front bottom panel

    Feb 03, 2008 | Kenmore 46462 Front Load Washer

    1 Answer

    Kenmore Waher spin cycle out of balance


    Sounds like your front to back spring is pulling to tight, sometimes you need to replace it and sometimes you can take it off and stretch it. hope this helps

    May 19, 2007 | Kenmore 24872 Top Load Washer

    Not finding what you are looking for?
    Kenmore 46462 Front Load Washer Logo

    Related Topics:

    180 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Kenmore Washing Machines Experts

    fordexpert

    Level 3 Expert

    5692 Answers

    Kristen Denison
    Kristen Denison

    Level 1 Expert

    13 Answers

    Gordon Richard...

    Level 2 Expert

    250 Answers

    Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...