Frigidaire 31 in. GLEC30S8 Electric Cooktop Logo
A
Anonymous Posted on Jul 03, 2014

How do i shut off hot service light and cool the burner

1 Answer

  • Official Brand Answer 2,267 Answers
  • Posted on Jul 08, 2014
Frigidaire
Official Brand Answer
Level 0:

Joined: Mar 18, 2014
Answers
2267
Questions
0
Helped
1289301
Points
2557

Good Afternoon Friend,

I understand you want to know how to turn the "Hot" service light, and cool the burner on your Frigidaire cooktop, model# GLEC30S8. I suggest resetting your appliance, by either unplugging it or shutting the power off at your home's circuit breaker, for 3-5 minutes. Restore power and start any burner. I ask that you please follow up with a comment on the post, at your convenience, to advise if further troubleshooting is needed or if your appliances status has changed successfully. Hope this is helpful.

-Best Regards-
WP

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Are there problems with the kenmore 36-in. radiant cooktops 42749 hot surface indicator lights?

Most likely the problem is in the heat control switch.Cannot be repaired you will have to replace it. To make sure, swap it with one of the other burners that do not have the problem. If the problem goes away, you know its the switch.
0helpful
1answer

Large burner elements ignite, and igniter spark fails to stop, then the burner shuts off as if ignition failed. Tiny central burner element does NOT light at any time. Apparently the safety cutoff...

There is a thermistor that must be in the flame area that needs to get hot. When hot it will turn the igniter off and keep the flame on. Check it's location and if it is in the flame then it needs to be replaced. not sure about the central flame problem. could be the switch.
2helpful
1answer

Stovetop stays hot when burners are not on

Is it a glass top. If it is, glass will absorb the heat. It will cool off after some time. That is normal.
0helpful
1answer

Hot burner indicator light won't shut off

the switch for the bottom right burner is bad but doent not affect the cooking, just the light
4helpful
1answer

Looking for Cause of Fault Code on GE Range top JP939

Have SAME EXACT issue - F113 on Left burner. Indicator says HOT and not even on. Called a service company (NOT GE SERVICE). They said the Element Radiant is no good and must be replaced. Part is quoted as $323.98 !!! What a rip off from GE !

Jul 02, 2008 • Cooktops
0helpful
2answers

Burner light does not go off on Amana AKT3040

Sounds like a short in that particular burner circuit. Usually when the light stays on even after cool down the heat sensor is bad. This is inside the burner. If your getting white smoke the burner switch could also be shorted out.
1helpful
2answers

Cooktop light stays on when cool

the "hot top" indicator lamp is switched by a contact on the plate cut-out. sometimes this cut-out is available as a separate part but often must fit complete plate. by plate i mean the bit that gets hot!
Not finding what you are looking for?

120 views

Ask a Question

Usually answered in minutes!

Top Frigidaire Cooktops Experts

Brad Brown

Level 3 Expert

19187 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

RAJA NADEEM AKHTER
RAJA NADEEM AKHTER

Level 2 Expert

247 Answers

Are you a Frigidaire Cooktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...