Question about Maytag Performa PAV2200

2 Answers

I have the same problem , the water filled then stopped working ,

Cant get it to do anything at all.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

If the washing machine fills and overflows - it could be possible that the tube leading from the washing bowl to the pressure switch in the control panel on top of the machine has become disconnected at the back of the machine. (You will notice water leaking from the back of the machine if this has happened as it fills). The machine will not continue through to the washing cycle but you can spin and empty the water if required. Simply replace the tube to the base of the bowl by disconnecting the power, taking off the back inspection plate and reaching up and through the back to reconnect the clear tube to the nipple on the side and towards the bottom of the bowl. Spin to empty the water and reset the level to desired setting and try the wash cycle again.

Posted on Jul 11, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Sounds like your timer burnt out or is sticking somtimes giving the top of the controll box a firm smack will get it freed up

Posted on Jun 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a GE spave maker Laundry that fills up with water than stops!


GE Washer Not Agitating Repair Guide

www.appliance-repair-it.com/GE-washer.html
If your washer will not agitate or spin take a look at this page GE Washer Not ... If the washer fills up with water then doesn't do anything at all and you do not hear ... if this were the problem, the water would not stop running, over-filling the tub.

GE washer spin cycle not working - ApplianceBlog

www.applianceblog.com/.../217-GE-washer-spin-cycle-not-working

Mar 12, 2005 - 10 posts - ‎3 authors
I have a GE "Spacemaker Laundry" (Stackable) model number ... Today it filled withwater initially then stopped working all together when it ... Bad motor, something jammed/seized up holding the motor back from running?

Jan 10, 2016 | GE Spacemaker Washer and Dryer Electric...

1 Answer

Machine says "fill water tank"


look at the magnet (left, closer to you side, inside the water tank). It might be stuck. try bumping it slightly or insert a toothpick in the hole and slightly move it up-down. It might help.

Jan 06, 2011 | Spidem Trevi Digital Plus Coffee Maker

1 Answer

Kenmore washing machine fills with water then stops


turn the motor to see if it moves it sound like the motor

May 02, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

Maytag Washer Just Stopped After it Filled With Water (Timer?)


Cant rule out the timer but I suspect first check the lid switch. The timer and other components are fed from the lid switch on most models. Just put the2 wires together and reapply power if it works replace the lid switch. If not you'll have to have a wire diagram to know where to check next, but your water level switch "fill switch" could be at fault. it stops the water valve 1 way and can energize the rest of the circuits the other way. It may not be closing in the "full" direction. Again this switch if so wired will have 3 wires on it.

Mar 24, 2009 | Maytag Washing Machines

1 Answer

We just purchased a top load Kenmore 800 washer machine. We have washed 2 loads of clothes and Now it has stopped filling up with water. It will not do it to wash or to rinse. We have gone thru the mannual...


The first thing seems to be the timer,or the water level switch. Try filling the washer with water by hand, if it starts to agitate after being filled its the timer, if not it is the water level switch, let me know if you need further assistance.

Mar 13, 2009 | Washing Machines

1 Answer

WASHER FILLED WITH WATER AND STOPPED WORKING COMPLETELY


if you hear a motot running the coupling between the motor and transmission has disinagrated.

Dec 26, 2008 | Maytag MAT12CS Top Load Washer

1 Answer

Kenmore washer model 110.49722990 it will not go into the drain or spin part of the cycle, just sits there and hums, won't do anything. It will fill with water and wash,but thats all it won't finish the...


Does it fill with "cold" water?Will it spin?Drain?If the machine will fill up with cold water,will the timer advance by itself to finish?Or if you place the timer in spin cycle will it spin?First off if your not getting "Cold" water to fill inside :Replace the water valve (because when the timer stops after the agitation cycle it wont advance because it cant fill up with cold water.

May 23, 2008 | Kenmore Washing Machines

Not finding what you are looking for?
Washing Machines Logo

321 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Bill Long

Level 3 Expert

587 Answers

John Tripp
John Tripp

Level 3 Expert

4654 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...