Question about Bosch 1199vsr 1/2'' Dual Torque Hammer Drill 8.5a

1 Answer

Drill just stopped? not working

The forward drill just stopped working? reverse works, What happened?

Posted by on

  • blueextc3221
    blueextc3221 May 11, 2010

    directional switch failed.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 5,603 Answers

These tear the brushes out. You can not use them for hammering. It is a design problem.

Replace the brushes and use only for straight drilling.

Posted on Jul 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My impact driver when in reverse works fine but when in forward it will work for a few seconds then stop and keeps doing that. why?


I'd be looking for a defective forward/reverse switch, or a bad connection/wire on the forward side between the switch and the motor.

Jul 01, 2015 | Dewalt DW056 18V Heavy Duty 18V Cordless...

1 Answer

Having charged both batteries the drill will not work. It seems to not get any power.


Hi there, let me see if I can help.

1.Since this is a 4 piece kit, test the batteries in some of the other tools to make sure the batteries are good

2. This could be a malfunctioning unit, If you just bought it, take it back to the store and get a replacement, (you may have to take in all 4 and do a complete swap but most home improvement stores have no problem doing this)

3. The Forward and Reverse selector just above the trigger is stuck in the middle meaning, the drill is not in forward or reverse and when you press the trigger nothing happens. See Page 15 of this PDF for more information.

4. If none of this works, there is a Recall for that Battery Unit. Check This PDF to see if what you bought applies.

Hope this helps.

Brian

May 25, 2011 | kawasaki 19.2V 4 Piece Cordless Tool Kit

1 Answer

Turn it on-battery fully charged, worked a week ago, now when I snap it in nothing happens, reverse or forward...am i forgetting something?


Check the conections on the battery and drill aren't tarnished.
This is a common problem which prevents drills from operating.
The contacts can be cleaned with very fine sandpaper.Don't rub too hard or you will remove the chrome plating on the contacts.

Feb 03, 2011 | Bosch 12 Volt Cordless Drill

2 Answers

Panasonic EY7540 impact driver. Does not go into reverse on 1st


The forward/ reverse switch is hanging up and the rotation of the drill is switching it, then it changes direction. The switch needs a little TLC and a good cleaning. Blow it out.

Sep 26, 2009 | Panasonic Cordless 12V Compact Impact...

1 Answer

Bosch 1199vsr stopped working while drilling through concrete. The reverse works. Help


your tool should have a rotating reversing switch and the contacts for the forward rotation might be dirty or burnt. I would unplug the tool and remove the screw holding the back handle half on and look to see if anything is burnt or just dirty or bent. If you have an air compressor try blowing thru all areas of the tool. Let me know if this doesn't work you can also go to Boschtools.com and type in your model number on the left hand side after clicking on manuals.

Jun 28, 2009 | Bosch 1199VSR 8.5 Amp 1/2 Inch Hammer...

1 Answer

Works fine in forward but will not go in reverse


Assuming that it's within 2 yrs old, you can phone Hilti re getting it fixed under warrenty. Hilti has a warranty that covers wear and tear on the tool body for 2 yrs (batteries for 1 yr) - hope you didn't already know this...

Mar 28, 2009 | Drills

Not finding what you are looking for?
Bosch 1199vsr 1/2'' Dual Torque Hammer Drill 8.5a Logo

554 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bosch Drills Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Matt Olenzek
Matt Olenzek

Level 2 Expert

293 Answers

woodzowl307

Level 3 Expert

652 Answers

Are you a Bosch Drill Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...