Brother LX 3125
SOURCE: Top thread keeps getting wrapped around bobbin case on LX-3125
You should hold the end of the thread coming through the needle until the thread has grasped the bobbin thread.
SOURCE: My Brother LX 3125 does not sew zig zag stitches
Mine did the same thing. The needle is probably to high. Do not insert the needle all the way to the top. Lower it a bit and it should zig zag!
SOURCE: The bobbin thread does not fully rotate in the
Is there thread caught in the bobbin case? How far are you turning the wheel and are you holding the end of your bobbin thread out so that the top thread can hook it?
SOURCE: My needle does not stay threaded on my Brother Lx
keep a thread tail of 3-5 inches & when you sew make sure the thread is pulled behind the needle each time you sew, even if you have to hold the thread tail with your fingers
SOURCE: Unabble to use Brother LX-3125
the best thing to do is have the machine checked at a sewing machine shop
61 views
Usually answered in minutes!
×