Question about Fisher Paykel EcoSmart GWL15

1 Answer

Fisher and paykel smart drive... Water does not go in

My washing machine turns on ok and when i press start, nothing happens, the water does not go in. All the lights are on but nothing!!

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.


    An expert that has over 500 points.

  • Expert
  • 351 Answers
Re: Fisher and paykel smart drive... Water does not go in

Check the reed switch under the lid (magnet) and the cold water may be just a cold valve they get slow flow common problem

Posted on Mar 02, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

2 Answers

Fisher and Paaykel Smart Drive 708 not working once filled with water.

You need to check your lid switch & out of balance switch for
corrosion and replace if faulty.
Your out of balance switch is under the big yellow motor controller
OOB switch Is where the grey plate is on this picture.


Mar 03, 2013 | Fisher and Paykel Washing Machines

1 Answer

Fisher & paykel smart drive 9 mw059au no power

Most of the faults are pump related.
check the Ohms reading on pump should be 33- 35
If readings are less change your pump.

Jul 28, 2012 | Fisher and Paykel Washing Machines

1 Answer

Hey, my f&p smart drive 9 excellence washing machine does not start wash cycle after entering water level etc.... upon pressing the start button nothing is happening any thoughts?

Is the bowl turning slowly when you press start.if it does then you may have a faulty inlet valve,make sure taps are turned on.try advancing the machine to spin cycle,see if it will do any other things such as spin & drain.if it does then probably just not letting in water & inlet valve needs replacing..try filling machine by hand & see if it washes.

May 24, 2010 | Fisher and Paykel (IWL12)

1 Answer

Our Fisher and Paykel 603 smart drive has stopped

most likely your problem is your lid switch visit your local spare parts dealer and purchase a new one

Feb 06, 2010 | Fisher Washing Machines

6 Answers

Fisher and paykel 7.5 smartdrive washing machine, no power

If there is power and all your lights are lighting up but you get no responce from the machiene eg no spin, water filling, wash cycle or drain then it will be the sensor for the lid it will have coroded but this is an easy fix , I hope this helps

Feb 20, 2009 | Fisher Paykel Eco IWL16

2 Answers

Fisher & Pykel Smart Drive 9

Spin the fan on water pump (you can acess with difficulty from bottom of washer) if it has a little sand in it, it may clear. It is possible to remove water pump if mechanically minded and see if something small eg staple or 5c coin is stuck in it if this dosn't work or you may find you need to replace water pump.

Aug 19, 2008 | Fisher and Paykel Fisher & Paykel Washer

2 Answers

Fisher & Paykel smart drive 708 filter

my machine swiches on but wont let it fill with water.
Any ideas?

Mar 17, 2008 | Fisher and Paykel Fisher & Paykel Washer

Not finding what you are looking for?
Fisher Paykel EcoSmart GWL15 Logo

390 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fisher Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Fisher Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides