Question about HP DeskJet F380 All-In-One Printer

1 Answer

Why the error indicator (E) and orange light stay on constantly. As such the printer wont print, copy or scan? Hwat is the problem?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Expert
  • 224 Answers

Resetting the All-in-One

  1. Press the On (why the error indicator (E) and orange light stay - c00636182.gif ) button to turn off the unit.
  2. Disconnect the power cord from the back of the unit.
  3. Connect the power cord to the back of the unit.
  4. Press the On (c00636182.gif ) button to turn on the unit.
If the above does not work heres a website that will help you

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00859575&cc=us&lc=en&dlc=en&product=1128296


,If this doesn't then your hardware of your printer has gone bad and so call in to hp at 1800-474-6836 and ask for an upgrade where you will get atleast a 30% discount on a factory new printer,dont know why they call it refurbished as the hp factory only resets the printer but no one has used it before.

Posted on Jun 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Orange light c staying photo copies ok but wont print


Canon MP230 Override Empty Cartridge Message

The c light on a Canon PIXMA printer means the colour cartridge is registering as empty. You can carry on printing by holding down the stop/reset button on the printer for around 5 seconds. See the link above to a Youtube video that shows you how.

Feb 25, 2015 | Canon Office Equipment & Supplies

1 Answer

Why wont my all in one device copy


for hp office jet 6110 if you have a flashing orange light you will never be able to copy or scan- in addition both print cartridges must have ink,installed & functioning also do you have the user manual?

Aug 19, 2014 | HP Officejet 4500 All-in-One Printer G510G

1 Answer

Unresponsive


This sounds like an ink pad warning.

Try resetting this.

Dec 12, 2013 | Canon PIXMA MP180 All-In-One InkJet...

1 Answer

Wont print with all new ink cartridges


If the error message is only "magenta/cyan low", it doesn't cause any error. The low message stays after replacing ink cartridges if they're replaced too early (before they're indicated as actually empty), it doesn't cause the printer to not work.
However, some other problem might be faulty, or there might be another error message. Try emptying printer queue and print from Ink Management -> Menu/set (twice) to check wether the problem is with communication from pc or if the printer actually is unable to print.

May 29, 2009 | Brother MFC 210C All-In-One InkJet Printer

1 Answer

Triangle on front constantly on orange. wont scan nore print


Replace or refill the VO51 in cartridge, it's out of ink.

Apr 29, 2009 | Office Equipment & Supplies

1 Answer

Hp officejet 5610 Wont scan . Print. Copy


your printer is dead and is uneconomical to repair. sorry

Jan 25, 2009 | HP OfficeJet 7310 All-In-One InkJet...

1 Answer

932C Constant blinking ink light


problem here is the orange light blinking- has ink in the cartridge- stopped printing in the middle of the page

Jul 19, 2008 | HP DeskJet 932c InkJet Printer

1 Answer

How do I get back to print mode?


All you needs to do is reset the printer by;
Power off the printer
Hold the stop/reset button then press and hold power (for 5 secs)
Hold Power and release the stop/reset button
Press the stop/reset button twice
Release power button
Wait until the power button lights a steady/still green, press the stop/reset button three times with a 3 sec space between each press.
On the 3rd press the indicator should be orange.
Press the power button to set data
The press power again to shut down
and then again the restart.
This should reset the print should work.

Dec 24, 2007 | Canon PIXMA MX310 All-In-One Printer

1 Answer

Canon bjc 240/orange light stays on


The blinking orange light could mean one or more of the following: -Home position error -Waste ink full error -Temperature sensor error -Printing position correction error -Cleaning error -Printer memory error I would probably clean the waste ink tank first. Make sure you unplug it first. Take the cartridge out and clean real good at the bottom.

Jul 01, 2007 | Canon BJC 240 InkJet Printer

Not finding what you are looking for?
HP DeskJet F380 All-In-One Printer Logo

960 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...