Question about HP PSC 2410 All-In-One InkJet Printer
I had a paper jam. I removed the paper but the error message is not going away. A thinly film like piece was accidently pulled with the paper. Does this have to do with the problem?
SolutionStep one: Perform a power reset and connect the printer directly into the electrical outlet Remove all the paper loaded in the main input tray.Make sure that the product is turned off.
Disconnect the USB cable from the back of the product.
Disconnect the power cord from the product.
Disconnect the power cord from the electrical outlet and wait 10 seconds.
Reconnect the power cord directly into the electrical outlet and check for the following.
Make sure that the power cord used is the one provided with the product.
If a computer is connected to the product, make sure that the computer is connected to a grounded (three-prong) wall outlet.
Make sure that the power cord is firmly connected to both the product and the power supply.
Reconnect the power cord to the back of the product.
Press the power button ( ) to turn on the product.
Reconnect the USB cable to the back of the product.
If the issue is resolved, proceed to Step six: Print a self-test page.
If the issue continues, proceed to the next step.
for more information please go to below link>>
Thanks for using FixYa.
Posted on Feb 03, 2009
Tips for a great answer:
Mar 21, 2011 | Printers & Copiers
Oct 04, 2010 | HP Officejet Pro 8500 Wireless All-In-One...
Sep 20, 2010 | Printers & Copiers
Aug 21, 2010 | HP PSC 1610 All-In-One InkJet Printer
Aug 20, 2010 | HP Officejet Pro L7580 All-In-One InkJet...
Jun 02, 2010 | Epson Stylus Multifunction Inkjet Printer/...
May 18, 2010 | Epson Stylus CX9400 Photo Printer
Oct 17, 2009 | Epson Stylus R290 InkJet Printer
Sep 15, 2009 | Kodak ESP 5 Printer
Nov 28, 2008 | Epson Stylus Photo 1280 InkJet Printer
96 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: