Question about ASUS SiS Chipset P4S133 (P4S133/PA/LAN) Motherboard

1 Answer

Where to plug in start button wires, i have nothing on the screen

I have a computer that i and a friend put together a few years ago. It was fine for a couple years, then I was diagnosed with brain cancer and after months in a coma, years of chemo and radiation, and surgeories, I'm fine but my computer isnt. Friends and family assumed I wasnt gonna make it and sold or gave all my stuff away, I was able to get my computer back after sitting for a couple years. My friend that helped me put it together originally unfortunately is deceased, and my dics and manuals have been long thrown away. Now, I have an older computer and I can't get it to work, the green light on the motherboard is on, but thats it. The wires from the start button and reset button from the gigabyte tower are not plugged in anywhere and I have no clue where they go.

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 20 times.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 16 Answers

Here is a direct link to the motherboard manual that will have the pin layout for the power and reset switches on your case:

just plug the labeled wires coming from the front of th case into the pins shown in the manual and if the power switch still doesn't work try reversing the way it is plugged into the pings (switch the positive (+) and Negative (-)) and then try it again.

Posted on Jul 03, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have bought t this laptop about a weeks ago. It has been working fine. Today, I can't get the screen to come on. nothing was downloaded or opened that was out of the ordinary.

Maybe your battery has lost a charge or the computer is sleeping/in power save mode.

Plug it in to power first, wait a few minutes, then try the power button to turn it on.

May 16, 2017 | The Computers & Internet

1 Answer

I am trying to start another load to dry, but when I press the start button it is not responding. I cleaned out the lint collector, but still nothing. It was working fine a few hours ago. Any ideas?

I would check the door switch, you can bypass it by connecting the two wires together. This should let it start, just make sure you unplug the machine before you do this.. Good Luck Tim

Aug 30, 2010 | Whirlpool LEV4634 Dryer

1 Answer

My HP Pavilion PC will not start. The on button indicates it is on but it is not. Monitor says "no signal". The power supply failed a few years ago and it was replaced. Do you think this is what happened...

I do not know exactly what is going on with your computer, but if the light by the power button comes on and stays on then you can try pulling the ram out of it and then put it back in. A few years ago i had a compaq computer and all of a sudden it would not come on but the light by the power button was on. I thought the computer was shot but i contacted a tech and he told me to pull the ram out and put it back in. I did this and the computer came back to life and worked fine. Good luck. I hope this works for you.

Aug 09, 2010 | HP Pavilion a1610n PC Desktop

1 Answer

Crazy Electrical Problem in 2005 PT Cruiser

Either wire harness problems or you got a so called lemon
One of the first books of Ralph Nader about auto industry.

Had a Hyundai like that 27 years ago. Until I took it totally apart and re-assembled it myself. 2 years ago bought a Piaggio 45 cc motorbike, same story. Took that apart one night and put it together as should be.

Apr 15, 2009 | 2003 Chrysler PT Cruiser

1 Answer

Got in my jeep turned the key and nothing! it will not start.

remove the small wire going to starter motor solonoid and put a test light on it --if it doesnt light up when key is turned then work your way back till you find the fault,relay? contact switch on ignition??

Apr 11, 2009 | 1995 Jeep Grand Cherokee

1 Answer

Frigidaire dryer

There is a switch under the lid,Look for a slot onder where the lid rests on the dryer,there is an actuator under there where the dryer lid when shut should avtivate,this switch is either bent out of place,or the little pin that hits it when shut is missing or broke off.

Aug 07, 2007 | Frigidaire GLEQ642A Electric Dryer

1 Answer

Screen goes blank when I plug camera into computer

I have to say Mac's I know nothing about. But the simple way would be to purchase a universal USB card reader- and use that.

Jul 04, 2007 | Canon PowerShot A520 Digital Camera

Not finding what you are looking for?
ASUS SiS Chipset P4S133 (P4S133/PA/LAN) Motherboard Logo

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top ASUS Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Alun Cox

Level 3 Expert

2678 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you an ASUS Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides