Question about KitchenAid Architect KGCP484KSS Gas Cooktop
Check 1st i have a power or in plug the unit,if ok the power, nid to replace ther ignition coil but is expensive,use macth temporary if u use ur cooktop
Posted on Jul 04, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
We called in an appliance repair technician. He said during the cleaning process of the cooktop, when the control knobs had been removed to thoroughly clean the cooktop, some cleaning fluid or water or moisture got into the ignition switch panel under the cooktop. Letting it dry for 24 hours should fix the problem and this appears to have done that.
Posted on Feb 18, 2009
you need orifices for lp and the regulator should be convertable there is a "plug" thing in the middle of it that you remove and turn over and install
Posted on Apr 23, 2008
most likely the problem is the switch places onto the shaft of the valve. to replace the switch, you would need to remove the burner cap and port rings. you will see a large brass nut that needs to be removed on all 4 or 5 burners. next you would need to remove the nut in the center of the simmer port ring which is also the venturi for the main burner. you must be careful when removing this nut as they have a tendancy to lock onto the jet holder and could be hard to remove (don't strip or break the venturi or holder).....after you remove those nuts, the burners and top can be removed (watch the igniter wires). you can remove the switch by removing the retainer clip that holds the switch onto the valvestem.
Posted on May 28, 2009
Now I have not read this manual because I would really need to physically see and inspect the make and model of cooker that you have in order to advise you on this exactly, but even so here is a manual I have found for you to read. If however this does not turn out to be the right one for you, please let me know and I will find you the correct manual ASAP.
I hope this is the fixya for you, and if you haave any problems, questions or comments please get in touch and I will respond accordingly.
Posted on Mar 07, 2010
Here is a tip that I wrote that will help figure out why the burner spark keeps on clicking...
Gas Range Repair Burners Keep on Clicking
Posted on Aug 19, 2010
Tips for a great answer:
Jul 13, 2014 | KitchenAid 30 in. KGCS105GSS Gas Cooktop
Jun 24, 2010 | Whirlpool 30 in. SC8720 Gas Cooktop
May 15, 2010 | KitchenAid 30 in. KGCS105GSS Gas Cooktop
Apr 24, 2010 | KitchenAid 31 in. KGCS105 Gas Cooktop
Apr 01, 2010 | Whirlpool SCS3014 Gas Cooktop
Apr 01, 2010 | Whirlpool GLT3615 Gas Cooktop
Feb 17, 2009 | Cooktops
Jan 28, 2009 | KitchenAid 30 in. KGCS105GSS Gas Cooktop
Jun 09, 2008 | KitchenAid 31 in. KGCS105 Gas Cooktop
683 people viewed this question
Usually answered in minutes!