Question about GE Profile 26.6 cu. ft. Side-by-Side Refrigerator with Dispenser TFX27PRBWW

1 Answer

GE Profile Side By Side is Unlevel


Where do I find the levelers to level the refrigerator? They are usually in the front behind the cover thing. They are not anywhere I can find.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

They are there just look alittel different- remove front grill . look on floor for roller contact. look at the center line of the roller and follow it up ward into the compartment you will see a threaded bolt with a ground head add box end wrench and you can adjust your roller contact with the floor

Posted on Jun 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ge profile counter dept refrigerator door opens too far and hits the wall. Also does not self close as once did.


Put a level on the top of the unit. Side to side needs to be level. Front to back has to be canted to the rear by about 1/4 bubble. If that is good you need to adjust the hinges.

Jan 06, 2014 | GE (PSS26MSRSS) Side by Side Refrigerator

1 Answer

Refrigerator door is not sealing


Sounds like the cabinet is unlevel. Try grabbing one of the front corners and with a twisting motion pull to one side and see if it trues the doors. If it does, you will need to adjust the front levelers or install a shim or two in the rear.

Sep 27, 2011 | Refrigerators

1 Answer

Hi, I have a G.E. 2 door fridge with ice maker mod TFG25PRY,it requires a new compressor. Can you tell me the compressor watts (refrigeration) for this model. Regards John.


Compressors are usually rated in BTU's and are found on the the spec sheet, which is usually under the front of the machine behind the kickplate.

Feb 03, 2011 | GE Profile 25.6 Cu. Ft. Side-by-Side...

1 Answer

GE Profile leaking onto floor


Clean the drain pan and drain line in the back of the freezer section behind the cover underneath the evaporator coil. (hint: use turkey baster with hot water) Make sure water drains when you pour it in. If it doesn't - also clean drain tube on the back of the unit behind the cover. When done - put the tube exactly where it was.
Good luck! :)

Vlad
First Choice Appliance

Apr 19, 2010 | GE Profile TPX24PBDCC Side by Side...

1 Answer

The fridge is unlevel front to back. The front is relatively too high. How do I level the beast?


The front should be a "little" higher than the back, in order that the doors will close softly when pushed past a certain point, and to assist in sealing the door to the cabinet. There is a levelling mechanism on the front rollers, turning a screw or bolt head clockwise will raise the rollers and counterclockwise will lower the rollers. If no rollers, then post type feet that screw in and out for height. Most have rollers in front and these can be adjusted with the screw or bolt that you can see in the front behind the lower cabinet cover. It should lift and pull straight out to remove, and you will then see the adjustment bolts or screws. You should be about half a bubble out of true level for the doors to seal well and close softly.

Sep 26, 2009 | Samsung RF265AA Bottom Freezer French Door...

1 Answer

GE Profile freezer door problem


I wil let you know of things you can do to solve this.
This happens because the refrigerators of today are air tight, the fresh food door pushes the air into the cabinet as it closes and the air has no place to go but up the air vent into the freezer and "pops" open the freezer door. First thing is make sure the freezer door is capable of closing properly and is not rubbing or catching anywhere. I sometimes add a washer or 2 to the center hinge under the freezer door so it doesn't rub anything. Put a little Vaseline ( or food grade silicone lubricant ) on the hinge side of the seal. I then raise the front of the refrigerator so that the front of the refrigerator is a little higher than the back of the refrigerator. Never level a fridge with a level. Once you have the door closing properly and front slightly higher than the back...let the fresh food door close from 90 degrees on it's own and the freezer door may "pop" open a little but will close again on it's own...and stay closed once all is set up properly. We see this more often now and have no trouble with the door staying open again after setting up the refrigerator properly.

Hope this helps, Thanks Sea Breeze

Sep 22, 2009 | Refrigerators

1 Answer

Unlevel fron front to rear, how do I fix?


there are levelers on the front and back legs, you may need to move the fridge out so you can get to the back legs

Aug 01, 2009 | Jenn-Air JCD2295HES Side by Side...

1 Answer

Leveling old refrigerator


The refrig does not have to be level, as a matter of fact, they tend to work (doors on most refrig's) if the front is a bit higher than the back. If you pop off the lower grill, you will see that the front rollers have a bolt that runs up through the lower frame. Turning on the end of that bolt with a 3/8 inch wrench will allow adjustment of an inch or so, up or down, depending on where it is at now. Only the front rollers are adjustable this way. Back rollers would have to be shimmed to adjust. Check the door hinges to see if the hinge and corresponding hinge cam riser (WR2X4901) are worn. (these parts raise the door slightly as it is opened, and help close the door as the door drops back down when closing.)

Dec 06, 2008 | Kenmore 18.3 cu. ft. Top Freezer...

1 Answer

GE side by side frig freezer TFX24ZR


check and make sure the collection tray for the defrost system and the drain tube are in place and level. it is the usual culprit. let me know if this helps.

Nov 04, 2008 | GE Profile 26.6 cu. ft. Side-by-Side...

1 Answer

Leveling old refrigerator


you can adjust the front rollers by turning the screws at the bottom behind the toe kick

Jun 09, 2008 | Maytag (MFI2568AEW) Bottom Freezer French...

Not finding what you are looking for?
Refrigerators Logo

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top Refrigerators Experts

Sal DeAngelo

Level 3 Expert

2128 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

dweatherby

Level 2 Expert

239 Answers

Are you a Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...