Question about RCA RCR311B Remote Control
Hi, for T.V 1004, 1051, 1052, 1061, 1065, 1075, 1083, 1087, 1091, 1102, 1104, 1105, 1106, 1107, 1132, 1157, 1158, 1189, 1203, 1206, 1210, 1251, 1274, 1287, 1337.
DVD/VCR Try?! 2004, 2009, 2032, 2034, 2037, 2054, 2056, 2057, 2302, 2307, 2310,2314, 2318, 2319, 2326, 2327, 2330, 2340, 2342, 2345, 2356, 2357.
Posted on Oct 18, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Aug 26, 2011 | Orion FTDV2004 20 in. TV/VCR/DVD Combo
The One For All 3 Device Universal Remote Control is preprogrammed at
the factory to operate an RCA TV, a Toshiba DVD player, and a Motorola
cable box.To control devices other than the default brands,perform the following
steps; otherwise skip this section:
1. Turn on a desired device (e.g.,VCR or DVD player) and, if
applicable, insert media (e.g., cassette or disc).
NOTE: Please read steps 2 through 4 completely before proceeding.
Highlight or write down the codes and device you wish to program
before starting step 2.
2. On the remote control,press a device key once (i.e., DVD/VCR,
NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo,
or TV/VCR/DVD Player Combo press DVD/VCR once.After programming
a VCR Combo device, you will be able to control channel selection,
volume, and VCR functions.
NOTE: To program control of a DVD Player,DVD Player/VCR
Combo, or TV/DVD Player Combo, press DVD/VCR once.After programming
a DVD Combo device, you will be able to control channel
selection, volume, and DVD functions.
NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR)
Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR)
Combo, press CBL/SAT once.
3. Press and hold SET until the LED (red light) blinks twice,
then release SET.
4. Use the Manufacturer's Codes (starting on page 18) to
locate the type of device and brand name and then enter
the first four-digit code for your device. If performed correctly,
the LED will blink twice.
NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter
the same code again.
Aim the remote control at the device and press POWER
once.The device should turn off. If it does not, repeat
steps 2 through 5, trying each code for your brand until
you find one that works. If it still doesn't work, try
Searching For Your Code on next page.
NOTE: If the device does not have a POWER key, press PLAY.
Mar 20, 2011 | One For All URC-3021 Remote Control
Sep 16, 2010 | Orion FTDV2004 20 in. TV/VCR/DVD Combo
Mar 04, 2018 | Zenith C27C41T TV
May 04, 2009 | One For All URC-3300 Remote Control
Mar 21, 2009 | Philips Magnavox DVD/VCR Dual Player
Feb 18, 2008 | Televison & Video
Nov 06, 2007 | RCA RCU300WBL Remote Control
149 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: