Mtd 990 18hp. briggs charging system wiring diagram

Here's a link that will show you pictures. Lawn Mower Parts Small Engine Parts Much More PartsTree com Briggs MTD...

the wires you have are a ground wire a charging wire if you have a charger and the coil plug wire on a short blocked motor you might have a secondary stop wire to

hello for heavy machinery
u will find a lot of wiring diagrams and
circuit diagrams and stuff like this at few sites I know
the girl in the chat box can help u instantly

Most owner's manual have a wiring in them. I'll try to send you a my picture. See you later.

check and test the safety switches solenoid and wire connections

I don't know if your model is the L-Head or the OHV design but these diagrams cover about all of them.
http://images.search.yahoo.com/search/images?_adv_prop=image&fr=slv8-msgr&va=briggs+throttle+linkage+diagram

Go to link below for a parts break down for your tiller. Starts on page 23

http://dl.owneriq.net/c/c23c1d7c-74ff-4347-b31e-a0ee0462b35e.pdf

here is a picture from the breakdown of a 15.5 hp briggs engine hope this helps

Simple wiwing.

the charging system runsfrom a stator which is underneath the flywheel and runs to a rectifier/regulator module and to the battery. it will power the blades if it is an electric clutch system and also the fuel plunger system on the carbuerator