- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Just when you are looking for simple instructions, I come along. 1st I cannot locate instructions and don't believe the tent is still made. 2nd, the Alps Chaos 3 person tent setup is a uTube clip that may suffice. 3rd, there are various tips here that suggest the best setup for this tent. 4th and lastly, the zippers seem to be subject to leaking plus it is probably a good idea to have some sealant handy to reseal seams probably as a preventative. It is better to know now rather than be caught in a storm.
How to Assemble an Ozark Trail Tent ' Trails.com
How to Assemble an Ozark Trail Tent. ... The easiest way to do this is to position one person on each end of the pole ... Assembly Instructions for Ozark Trail Tents
Ozark Trail Family Dome Tent 15' X 9' Instructions
https://bepesepa.files.wordpress.com/2015/10/ozark-trail-family... · PDF file
Ozark Trail Family Dome Tent 15' X 9' Instructions ... Ozark Trail 8 man tent 16 x 10 family dome tent ... Ozark Trail Family Dome Tent 15' X 9' Instructions
Select a flat camping area and clean the area of sticks and rocks. Remove the tent from the bag and spread out the tent body with the floor on the ground. Assemble the tent poles by connecting the attached sections at the ferrules. Set the poles on the ground and separate by size.
Locate the three long sleeves on the tent body. One sleeve is horizontal over the screen room and the other two cross the main tent body to create an "X". Locate the three long poles and slide one through each sleeve. Place the corresponding pins in the end of the poles. The poles will flex and erect the tent body. This step is best attempted with two or more people.
Attach the clips to the exposed sections of the tent poles. The clips are attached to the ten fabric and will add rigidity to the tent. Locate the next largest pole and insert it through the sleeve on the screen house. Locate the metal grommets where the screen room meets the main tent and place each end of the pole in a grommet.
Locate the two smallest poles. These are for the side rooms. Insert one pole through each of the side room sleeves. Attach the ferrule of one steel pole to each end of the side room pole. Insert the corresponding pins in the end of the upright poles to support the side rooms.
Pull on each end of the tent to ensure the floor is tight. Use a rock to pound stakes through the ground loops on the tent. Place the floor mat in front of the screen room door and use stakes to secure the mat to the ground.
Place the fly on the tent and make adjustments until the shape of the fly matches the tent. The fly will only cover the top of the screen room and the entire body of the main tent. Locate the D-rings on the base of the tent and attach the fly hooks to the closest rings. This will tighten the fly to the tent body.
Locate the guy ropes on the fly. Pull the ropes to the ground at an angle and pound stakes through the loops to anchor the tent to the ground.
Hi, Have the assembly instructions for putting up this tent if you still need? Chinese manufacturer! although in English but to be honest not very helpful. We managed to break 1 of the fibreglass poles just trying to assemble it in back garden. We are not exactly tent novices but we found this paticularly difficult with no room for error.
TIP- Measure it out before you start. Rubber! Sorry metal tent pegs dont help! Would I advise to buy? I dont think so! If you still need instructions message back and I will scan for you.