Question about Janome Memory Craft 9000 Computerized Sewing Machine

1 Answer

The icons are out of sync.

My Janome 9000 sewing machine was covered while it was turned on and overheated. Everything seems to work, but I have to touch to the right of the icon to access the feature.

Posted by on

  • kthornbury Jun 27, 2009

    Thank you so much. Your solution worked perfectly. You saved me a trip to the dealer and a probably expensive outcome.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 208 Answers

Have a sewing machine needle handy and turn the machine off.

With your left hand, press and hold /StartStop, Up/Down and reverse while switching on the machine. The screen should display little cross hairs. Using the BLUNT end of the needle NOT THE TIP, press the exact center of the cross hairs. Continue a the cross hairs will change positions on the screen. When finished, switch machine off, wait five seconds and switch back on.

Posted on Jun 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Non responsive touch screen janome mc 9000


can you not take or send the machine back, you say you just bought it?

Apr 07, 2016 | Janome Memory Craft 9000 Computerized...

2 Answers

What type of bobbin does the machine use. I checked the book but cant seem to find a number. Janome memory craft 9000


they are called janome bobbins, but need to be flat ( there are some out there with a curve). the best place is to try an janome store as i have had a few that will not fit

Jan 31, 2010 | Janome Memory Craft 9000 Computerized...

2 Answers

Janome 9000 seems to be jammed.


I just want to know the price of janome 9000

Dec 27, 2009 | Janome Memory Craft 9000 Computerized...

3 Answers

Janome MC 9000 off touch screen calibration


Thanks guys

I remembered the fix!!

On the Janome MC 9000

To calibrate the touch screen

1. Turn off
2. on Sewing arm above needle there are a series of buttons
3. Hold down bottom 3 buttons
4. While holding turn on machine
5. Using scribe
6. Touch the centre of each + as it appears
7. It will go Centre bottom rh centre top lh as you select each + position it moves of it's own accord.
8. Turn off machine
9 Turn on and test.

Important sometimes this does not entirely fix prob!!
Simply do it again "Yahoo""
Some mechanics will try to tell U the screen is on it's way out
Bollocks just calibrate.
Thanks
CYA

Nov 16, 2009 | Janome Memory Craft 9000 Computerized...

1 Answer

I have a Janome MC9000. The touch screen is out of sync with the icon. I purchased on eBay so no dealer will touch it. Only one function on the extreme right hand (the instruction panel) works (the menu...


If you would like instructions on How To Reset the Touchscreen for the MC 9000 (or other model Janome) so that the icons re-align, please use the link below to contact me and just make sure to mention the specific request and model number (we get a LOT of mail).
Same Reset offer applies for other Janome Touchscreens, and we even even have a replacement LCD Backlight for any MC 8000 or MC 5700 that is growing dim.
Bargainbox.com.au

Jun 19, 2009 | Janome Memory Craft 9000 Computerized...

3 Answers

I have a Janome MC9000. The touch screen is out


You need to adjust the screen. Turn the machine off. Press simultaneously the three buttons on the front (Start, reverse and stop) at the same time turn the machine on.

Press the crosses that appear on the screen and it should all be fine.

Jun 10, 2009 | Janome Memory Craft 9000 Computerized...

1 Answer

Janome 9000


I have a Janome 9000, was sewing and broke needle, replaced and broke another. I didn't have machine threaded, took out bobbin and would sew a little and stop saying thread broke. I took off top plate and started machine again, sew a little and stop saying thread broke. So I took out bobbin case and sewed again and stopped repeating the message. Everything looks OK, bobbin case and top plate. I guess I want to know if the timing could be off or do you think it is the computer part of the machine...Should I take it to the Sewing Machine Shop??

Apr 30, 2008 | Janome Memory Craft 9000 Computerized...

1 Answer

Janome 9000 willl not work when turned on


My Janome 9000 has always done that. I can prevent it by raising the needle when I first start the machine, getting it to sew quickly or raising the needle and letting the machine sit for a few minutes. I think my computer wants to warm up a minute. As you can see I.m not a technical person but it works for me.

Nov 16, 2006 | Janome Memory Craft 9000 Computerized...

Not finding what you are looking for?
Janome Memory Craft 9000 Computerized Sewing Machine Logo

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Janome Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1125 Answers

Douglas Plant
Douglas Plant

Level 2 Expert

184 Answers

Irene Tulloch

Level 2 Expert

458 Answers

Are you a Janome Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...