Question about HP OfficeJet 6210 All-In-One InkJet Printer

2 Answers

When I power-up my HP Officejet 6300 all in one printer, All of the lights flash and the display says "Reset Power" Tried all the usual & useless fixes on the HP site. Help Gene

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Error message hp officejet6300 all-in-one RESET POWER can u help me

Posted on Sep 23, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Expert
  • 224 Answers

Try these resets,
connect the printer to the wall jack without the surge protector.
now while the printer is on unplug the power cable from the back of the printer and the walljack after 10 seconds connect the power cord to the wall jack and then to the printer.

doesnt resolve

Disconnect the power cable from the printer and the wall jack and wait for 20 seconds then while reconnecting hold down the power button and reconnect the walljack cord and then the printer.

doesn't resolve

do the above but this time pressing the #3 buttons and once its connected you can release the buttons.

does not resolve

try the above holding down the #6 buttons and once the cord is connected then only let go of the buttons.

does not resolve

do the same by pressing #9 and once the cord is connected then only let go of the buttons,

if all fails then call in to hp and see if they have an upgrade for your printer where you will get not less than a 50% discount on the upgrade printer.
Cauz its a hardware problem with the printer,call in at 1800-474-6836.
open 24/7

Posted on Jun 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

All lights are flashing and it says Error 0xd0620130 reset power. I have unplugged all lines and even uninstalled it then reinstalled the software. After that it was fine till I tried to print...


Hope this helps, you need to Reset the product:
  1. Without turning off the product, disconnect the USB cable from the rear of the product.
  2. Remove the cartridges from the product.
  3. Wait for the 'Insert Cartridges ' message to display on the control panel.
  4. Disconnect the power cord from the back of the product.
  5. Wait 60 seconds.
  6. Reconnect the power cord. If the product does not automatically turn on, press the Power button (c01602202.gif ).
  7. Reinsert the cartridges, and then close any open doors on the product.
  8. If you receive a prompt to print a calibration page, do so.
  9. Reconnect the USB cable to the rear of the product, and then try printing again.

Apr 27, 2011 | HP Officejet 5610 All-In-One InkJet...

1 Answer

HP Officejet 6318 displays "reset


Go to this LINK.






If you need more help come back.Post / thumbs / testimonial are welcome!

Nov 23, 2010 | HP OfficeJet 6310 All-in-One Printer...

1 Answer

I have an HP Officejet 6300 all in one. The printer will disconnect and connect all on its own. I can have just printed something and try to print a second page and it will have disconnected. However, it...


Try resetting the printer using following steps:
1. When your printer is on, unplug the wire that goes to the computer.
2. Presee and release (#) and (*) buttons.
ou will see your display say "Support Menu"
3. Scrolls to the right until you see "resets" and pess ok
4. Select "semi-full reset" and hit OK
5. After printer turns off, turn it back on 30 seconds later.

Jun 01, 2017 | HP OfficeJet 6210 All-In-One InkJet...

1 Answer

Power reset message


unplug it from the computer and unplug it from the wall socket and hold the power button down for 60 seconds then replug it back in to the computer and plug the power back on then turn it on.

Nov 20, 2009 | HP Officejet 5610 All-In-One InkJet...

1 Answer

My printer hp 6300 all in one does not copy. on display appears the write "Reset Power". what i have to do? many thanks


Hello sir; I believe your outlet share with so many device,that will cause this problem, one outlet one machine, turn power off and back on.

Feb 25, 2009 | HP OfficeJet 6310 All-in-One Printer...

2 Answers

Printer problem


That could be a signal of a problem. Reset the printer and make sure you get an OK light (usually solid green)

is the printer connected directly to the PC or is it a network printer?

Jun 13, 2008 | HP StorageWorks SAN Switch 4/32B Power...

1 Answer

All lights flash like crazy on powering up; diagnostic says "turn power off & on"


that is power suply broken. i already got one of those with same sintoms. you must exange it

May 12, 2007 | HP OfficeJet 6110 All-In-One InkJet...

Not finding what you are looking for?
HP OfficeJet 6210 All-In-One InkJet Printer Logo

1,087 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...