Question about Intel D845GVSR Motherboard

1 Answer

Security shipset on board

My board dont turn on and the error is security shipset sorry what can i do

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert who has answered 200 questions.

  • Expert
  • 256 Answers

Assuming that you are talking about the mother board, I can assure you that it will never has turned itself on at any time in human history. But it is part of a computer, which possesses the software required to turn itself on. Now, please, how do you expect us to help you by sending us a SMS cellular text message? So, if you would like us to help you fix your computer (we do this day in and out with great success) we will need from you the following information: (1) The Manufasturer's Name and the Trade Name of the Computer; (2) The Model Name and Number; (3) The Identification number of the mother board. If you can't find it we will help you happily. (4) We need a detailed accurate report of your problem, before it started, while it is going on and what you expect it to happen in the future. There may be a very fine point that you have past by, which will be our key to the solution of your prroblem. Please send us the information and we will duplicate you problem and give you easy to do tasks for fixing your computer!
CONSTANTIN (arzconst)

Posted on Jun 27, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

When I turn on my SamsungE3210 I just get a white screen, then it shuts off

Hi, the problem your having is a very common one all phones and laptops and portable dvd players have, now what is causing the problem is the connection from the circuit board to the screen, as this is a common fault then this means its not to expensive to put right, so if you want to keep the phone and use it then you need to get the connection from the screen replaced, most phone shops stock the part and can fit it the same day unless busy, its not something you can replace yourself due to the tools needed for taking the phone apart, sorry i couldnt give you an easy fix but without replacing the data ribbon between the circuit board and the screen it just will not work, give me a shout back if you need further assistance ok,

Jun 25, 2012 | Cell Phones

1 Answer

Need help with mercedes 190e problem

I agree with your mechanic knowing what after market immob's are like i would have it removed and see how it works then

Jan 03, 2010 | 1992 Mercedes-Benz 190

1 Answer

Sportcraft TX 2.5 treadmill - error code 3 - stops after a few seconds of operation. ??? Thanks for any advice

Sorry I dont have the solution but I have the same problem.
Read somewhere that Sportcraft control boards had
a design flaw.

Jun 28, 2009 | Exercise & Fitness

1 Answer

Security shipset on board

password protected bios?

you can reset it, by moving a jumper on the motherboard. download the manual for your model number, inside it will show you a pic of what jumper to move or take off.

Jun 27, 2009 | Computers & Internet

2 Answers

CMOS Error 0193

The security device plugs into the left front of the MB as viewed from the front. It is approximately 1.5" x 2 inches in size. they sometimes come loose form the socket when a system is moved. Open the case and see if it is there and loose. If completely gone, then you need to contact your MB supplier for either the device, a new board or a factory reprogram of the board to disable the missing device.

Oct 12, 2008 | IBM NetVista PC Desktop

1 Answer

CAnon Ir 5020i error E000100-001

No, it's not a fuser problem. It's related to the laser unit. The BD board is the beam detect board and its purpose is to detect the laser beam. The cause could be the laser unit itself, or the laser shutter is not working properly to unblock the laser beam when the front door of the copier is closed. The beam is blocked when the door is open as a safety precaution. The cause could also be mechanical.

Jun 08, 2008 | Office Equipment & Supplies

1 Answer

Dont know security code

i did generate the code for you even though in my database nokia 6300 is yet not should have worked in any case.
well in most cases the code is used in bypassing the phone security and would say it is best effective if you are changing the old security which you do not know or have forgotten.
what i can say now is that please send it for cable unlocking since remote unlocking for the particular phone is yet under way.
very sorry the code could not work.

Jun 01, 2008 | Nokia 6300 Cellular Phone

1 Answer

The computer turns on but do nothin more....

It sounds like the BIOS chip is bad. if you cant reflash the BIOS, then the board is dead.

Jan 10, 2008 | ASUS P5LD2 Motherboard

Not finding what you are looking for?
Intel D845GVSR Motherboard Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Intel Computers & Internet Experts

Alun Cox

Level 3 Expert

2678 Answers


Level 3 Expert

781 Answers


Level 2 Expert

73 Answers

Are you an Intel Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides