SOURCE: tv screen waves and is double
No. You have bad convergence output ic;s and probably at least 1 burnt resistor. This liely will have to be reconvergec in the servcie menu after the aprts are changed.
I’m happy to help further over the phone at https://www.6ya.com/expert/dewayne_4a10eab6caecdb92
SOURCE: JVC AV-56WP30 Convergence Problem
Hi
You have defective convergence correction amplifier IC replace the STK IC...
Thanks!
SOURCE: convergence is off on jvc av-56wp30
You will need to install a convergence repair kit which contains two Convergence ICs STK392-110 and then the associated resistors as usually a JVC will Need at least 1 or 2 of the resistors when the ICs fail. You can get the kit for your model at the following link which has the IC and all the resistors plus step by step detailed instructions on how to do the repair. This kit fits your model JVC
http://servicemanuals.vstore.ca/product_info.php/pName/av48wp30-convergence-repair-kit/cName/convergence-repair-kits
SOURCE: AV-56WP30 Convergence Repair
I got the correct answer from another free service, I can't afford your paid service and listed below is the only answer that I received from you for free:
Technical Support, Instructions & Repair Service
Dear lmoore44052,
A new solution has been posted for your JVC AV-56WP30 56 in. Rear Projection Television problem on FixYa.com.
Click here to read the solution:
http://www.fixya.com/ThreadView.aspx?thid=3140051&prdid=186352
Regards,
The FixYa Team
SOURCE: i have jvc av-56wp30 all of a sudden the red in
That sounds like a convergence failure. The AV48WP30 convergence repair kit from www.tvrepairworld.com should solve the issue. The kit contains the components and the CD with instructions.
47 views
Usually answered in minutes!
×