Question about Lexmark E240n Laser Printer
Unplugged from the mains electricity? Never. Pull every plug on the printer, turn the PC off, then replug and restart everything. You may need to reinstall the printer.
Posted on Jun 27, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Jul 16, 2013 | Lexmark Office Equipment & Supplies
The flashing light could
indicate either a communication problem between one of your cartridges and the
printer, a short in one of the cartridges, paper jam or the cartridge carrier
has stalled. Please follow the steps below to fix the problem:
1. Remove the sheets of
paper from the feeder. Make sure there are no foreign objects or debris in the
2. Open the printer
cover and remove both the cartridges.
3. While the cover is
open, ensure there are no paper jams and the cartridge carrier is free from
4. Close the printer
(pull out power supply, black box where the power cord is plugged in at the
back of the printer, and put it back after 30 seconds).
6. When the printer
turns on, reinsert one cartridge first.
7. Close the printer
cover and check the light status.
8. If light on printer
is normal, open the printer cover and reinsert the other cartridge. Check the
9. Replace whichever
cartridge is causing the light to flash with a new cartridge. You can also try
to insert a different known working cartridge to determine if the other is
10. Load some paper. Try
to print again.
If problem continues, please contact Lexmark Technical Support Center for additional assistance.
Aug 18, 2011 | Lexmark X2670 All-In-One Printer
Jul 26, 2011 | Lexmark X75 All-In-One InkJet Printer
Jun 18, 2011 | Lexmark Z2320 InkJet Printer
May 15, 2011 | Lexmark Z1320 InkJet Printer
Mar 20, 2011 | Epson Stylus DX6050 All-In-One InkJet...
1. Look at the indicator light on your Lexmark printer.
You'll need to replace ink cartridges when the light flashes or turns red
instead of the standard green.
2. Purchase Lexmark ink cartridges. You can buy the brand
name or purchase a generic version that is compatible with your printer. You
can shop for low cost ink cartridges from ABC Ink.
3. Remove the old cartridges from your printer. Grip the
sides of the Lexmark ink cartridges and pull it out. Dispose of the ink
cartridges in a recycle program like the one at Staples or save the cartridges
4. Install the new ink cartridges after removing the
protective tabs. Avoid touching the IC chip when installing the new Lexmark ink
cartridges. Replace the cover of the printer.
5. Allow the Lexmark printer to run a nozzle test. Print
several pages with the new ink cartridges to make sure you installed the ink
cartridges correctly. The indicator light should return to a solid green color.
do rate the solution if it helps
Nov 26, 2010 | Lexmark X1240 All-In-One InkJet Printer
Apr 24, 2010 | Lexmark C533DN InkJet Printer
Mar 09, 2009 | HP DeskJet 845c Printer
Oct 18, 2008 | Lexmark Z640 InkJet Printer
Oct 29, 2007 | Lexmark E240n Laser Printer
80 people viewed this question
Usually answered in minutes!