Question about Logitech X-540 Computer Speakers

1 Answer

Center/subwoofer speaker out...mixed

Hi. I have the exactly same problem... i have a Realtek HD sound drive and i set my ''orange'' plug to Center/subwoofer speaker out, but when i try to test the ''Center'' i hear the subwoofer and when i try to test the ''subwoofer'' i hear the subwoofer... conclusion: my Center speaker isn't working (running on 6 CH speaker -5.1)

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi all, I also purchased a logitech x-540 a few days ago and also have the center speaker outputting sound when i test or play the subwoofer. I didn't think this is normal and am now confused. Maybe its a problem with the audio drivers? MB is a ASUS P6T Deluxe V2 with Soundmax drivers. Hopefully someone can help to diagnose/ find a soluytion.

Posted on Jan 25, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I replaced my previous MIRO monitor today with an Acer S271HL. My PC has Windows 8.1. I can no longer get any sound.


Were the speakers part of the monitor or plugged into the side of the monitor.?..If so there may have been an amplifier in the monitor.. By replacing the monitor with one with no amplifier you have no sound.. The line output is not enough to drive the speakers ...you will need speakers with built in amplifiers that plug into a transformer plug and other green pin plug into the output on the computer.

Jul 06, 2015 | Acer 27" S271HL bid Full HD LED-LCD...

1 Answer

How do I plug the 3 wires from speakers into Dell XSP 8700?


Anonymous,
Below are the jacks for the sound card. Hopefully, it will help you get your speakers connected to the correct jack.
Realtek ALC3861 7.1 integrated audio
Gray = Middle surround out
Black = Rear surround out
Orange = Subwoofer and center out
Pink = Microphone
Green = Stereo out, Front Speakers, Headphones
Blue = Stereo in

25627675-cmq4uuvgx1xlr2vsmpalf0ir-5-0.jpg Thank You,
Dell-Jesse L
Dell Social Media and Communities

Apr 04, 2015 | Dell Audio Players & Recorders

1 Answer

Hi .. i have just bought a logitech x 530 speaker and only 2 of the speaker parts work .. can you please give me some solution advice?


Hi names Rui i like to help you by giving you step by step instruction in propely hocking up your logitech speakers:

Instructions

1. Connect the black plug of the rear right speaker into the black plug on the subwoofer.

2. Connect the yellow plug on the rear left speaker into the yellow input on the subwoofer.

3. Connect the red plug of the front center speaker into the red input on the subwoofer.

4. Connect the white plug of the front left speaker into the white input on the subwoofer.

5. Connect the d-sub connector plug from the front right speaker into the d-plug connector on the subwoofer.

6. Connect the green, black and orange input to the matching plugs on your computer. If you have a four-channel sound card, connect the green plug from the input audio cable to the front plug of the card and the black plug to the rear plug. Do not connect the orange input. If you are using a two-channel sound card, connect the green plug from the input audio cable to the "Line Out" jack on the sound card. Do not connect the green and orange plug.

7. Plug the subwoofer power chord into the electrical power outlet.

8. Place your subwoofer on ground around your computer desk. Position the front center speaker on top of your computer monitor.

9. Place the left and right front speakers on the sides of the monitor. Position the left and right rear speakers behind you, making sure they are pointing toward the front left and right speakers.

10. needs to support 5.1 surround. Normally, more than three sockets for sound indicates that it does. Then you need to use the software that comes with the sound hardware to configure it for 5.1 - Default will be 2.1 or just 2.
Check the control panel out. This is a lot easier under Windows 7.- Here you can access what you need via the speaker icon on the system tray (right click)
There is NO problem with your OS or hardware, this is pretty standard...

hope this will help you solve your problem.

Jul 18, 2011 | Logitech X-530 Computer Speakers

1 Answer

Sound on the speaker is very low voices are barely audible. have tried all eq settings but sound remains low please help


Look through your receiver's DSP sound settings. When you locate the volume control for the center channel, adjust it to be in balance with the music and sound FX. Often, I just forget about the DSP and run the sound in stereo with subwoofer. Helps to minimize the different audio mixes between different TV STATIONS AND DVDs.

Oct 06, 2010 | Cerwin Vega E-76C Center Speaker

1 Answer

I plugged my speakers into the orange circle behind my computer, and no sound is coming out. Why isn't working?


Hello Shantilla hi, the orange port is for the Center speaker for a 5.1 surround set up. to enable this you need to find the controls of the sound setup. usually on the lower right side of the computer. If the sound card is a Realtek brand the sound manager is the orange speaker ICON, need to open this sound manager software and enable 5.1 surround. You need the SOUND driver to use the surround setup.

Sep 21, 2010 | Polk Audio RM6700 White 5 Piece Satellite...

1 Answer

I have a pavillion d5000t and logitec x530 speakers and cannot seem to find the right combination to plug in the speakers - speakers have a black, a green, and an orange plug in and the computer has a...


It should go black to black, green to green, and orange to orange (the color coordinated pattern). I suspect your problem may be in the audio driver or a bad wire or bad sound card/ports.

First try re-configuring your audio (like you did when the computer was new):
If you have an audio card, start the software for that. Start > All Programs > Creative > Creative Sound Console. If you end up in Entertainment mode. Click on the Speakers tab and Autoconfigure the speakers.
If you have the on-board audio, see the Realtek audio in the Device Manager. Start > Control Panel > Hardware and Sound > Realtek HD Audio Manager. Click on the Speaker Configuration tab and choose your audio set-up.

Check if the Device Manager has a red x or yellow exclamation point for the audio. Control Panel > Hardware and Sound > Device Manager. Try updating the driver. (In Windows 7, this works best if Windows Updates is set to automatically install drivers as well as other updates. Look in Windows Updates, the driver may be waiting to be installed.) Then try reconfiguring again after a reboot.

Also check if the speakers are getting power. Note: the configuration step above won't work if the speakers aren't powered and plugged in. Try them on another computer if you can.

I hope this helps.

Cindy Wells

May 15, 2010 | HP Computers & Internet

1 Answer

Bose Companion 3 and Realtek HD Audio Card - No sound


Hi: I'm sure you checked the volume control of the Bose controller. Check where you plugged it in to the back of your computer. Mine has a veriable outpup and a fixed output. I hope this helps, Jeff

May 31, 2009 | Dell Computers & Internet

4 Answers

Windows 7 Audio Quadraphonic Not functioning well


Sounds like you are getting quad sound in the test process that checks them, yet when in windows media player or winamp (or whatever) your rear speakers aren't producing sound: Try setting your sound drivers to do something like "speaker fill" then you are set. I'm under the belief that stereo sounds aren't being matrixed into all 4 speakers.

Mar 25, 2009 | Computers & Internet

2 Answers

Subwoofer and center box problems with Logitech X530


Hi Sainty,

this is just a shot in the dark, but have you attempted to play around with your sound driver's configuration? I'm unfamiliar with the newer Nforce stuff, but try looking around in the sound manager Nvidia uses. It sounds like it's been configured to swap speakers. (As an example, I'm using the realtek audio manager on an asus p5k-vm board myself, and the option shows up as "Swap Center/ Subwoofer Output" in my configuration.)

Dec 10, 2007 | Logitech X-530 Computer Speakers

1 Answer

Surround Sound Center Speaker/Sound Card issue


You need to use a digital interface cable between the sound card and the speakers to get all of the 6 channels to work properly.

Sep 24, 2006 | Inland 58019 ThunderSound 5.1 PCI Sound...

Not finding what you are looking for?
Logitech X-540 Computer Speakers Logo

1,959 people viewed this question

Ask a Question

Usually answered in minutes!

Top Logitech Audio Players & Recorders Experts

kakima

Level 3 Expert

102366 Answers

gunzmith

Level 1 Expert

27 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Are you a Logitech Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...