I recently bought an m505 from a pawn shop (i know, bad idea) when i got it home i found that it didn't have a component cable. so i bought one that would work for $5. when i got everything hooked up, i realized that i have no sound at all. I haven't had time to troubleshoot it yet. are there a few simple fixes that i should try first before i get out my multimeter? It is hooked up properly. please respond to firstname.lastname@example.org
Hi aceistheone, did you ever get the problem fixed? I am encountering the same exact problem. I bought the componenet Video and stereo audio cable and the dvd picture comes in fine, I just have no sound. Any suggestions would be great! Thanks.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
TH-M505 can display in black in white if connected iimproperly using COMPONENT connections or if cables have gone bad. Try replacing component or changing connection to COMPOSITE. Does it play in black in white using COMPOSITE?
With no knowledge of your TV source component (cable box??) and how closely you have followed its connection instructions, no one can really help you out. I'm pretty sure you might need to run either an optical or coaxial (RCA) cable into your 'system' for it to decode 5.1.
When in doubt, Read the Manual.
your cooling fan is not engaging and coming on like its suppose to. One, the fan is probably burned out, which sucks because its low voltage and the only thing on the board that is low voltage. Two, there is a thermostat type component that tells the fan to start which HAS burned out and doesnt start the fan accordingly. If you look at the back fan and turn everything on you will see the fan either doesnt start or starts right as the relay trips turning the sound components off. If it starts at all your fans good.The thermostat component will need to be replace and I cant recommend a source. Just trying to explain the problem so you can look for the right repair. Hope it helps. I have one of these and have found this is the problem, but cant find the solution.
Sounds like your original and this sub have bad amps. The amp for the sub is not the same as the amp for the other speakers. The old unit has a dead amp and this new one is on the way out. (Pulling too much current on high bass)
I could either be the sub or the main unit. The main unit actually sends a signal to the sub to turn it on so if that circuit is bad in the main unit the sub is never going to come on. I've also seen bad cables (You'd be amazed at how stubborn people can be when din connectors don't cooperate).