Question about Epson Stylus Photo R300 InkJet Printer

1 Answer

Epson C88+ printer suddenly stopped printing

A message began to pop up saying parts inside your printer are near the end of their service life. See your printer documentation. Unfortunately this info is nowhere to be found in the user guide/ manual.
Any suggestions on how to solve this?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Epson Master
  • 419 Answers

Sorry this is a bit rushed but just quickly..

Problem is your waste ink counter has triggered the "change my diaper" warning..ie: your waste ink pads are full.

Easiest way to resolve this is to fit an external waste ink tank (guide here)

.. and reset the waste ink counter using the tool available from here:
http://www.wasteink.co.uk/epson-ipr-reset/


I wrote both guides and have modified 6+ C84/C86 and D88 printers now, so if you hit any problems post again and I should be able to help.

Cheers

Martin

Posted on Jun 28, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi Ya! I was looking out for the solution of the Epson 1400 printer having black toner shows pop-up message; which displays "Consumables near end of service life". "Prepare the following...


If a consumable product reaches the end of its service life, the product stops printing and displays the following messages in the LCD panel or the window of EPSON Status Monitor 3. When this happens, the product cannot resume printing until you replace the depleted consumable products.

The photoconductor unit comes to the end of its service life. Even if this message is displayed in the LCD panel, you can continue to print for a short time by pressing the B&W Start or Color Start button on the control panel. The message in the LCD panel changes from Replace Photoconductor to Worn Photoconductor.

Mar 22, 2011 | Epson Stylus Photo 1400 Printer

2 Answers

Parts inside your printer are near the end of their service life. See your printer documentation. _ Epson R200 printer.


Regarding the Epson Artisan 800, I must thank FixYa and ask that the search for a solution be discontinued.Yesterday, I had an unfortunate accident while trying to unclog the print head which had been printing poorly over the last three months. I used a syringe to force a solvent solution through the clogged head. To my utter surprise the supply line exploded with a loud "POP" meanwhile spraying ink all over the place. At this point it was clear that it was pointless trying to redeem the old Artisan 800. Thank you FixYa. Henry.

Feb 27, 2011 | Epson Stylus Photo R200 InkJet Printer

2 Answers

Parts inside your printer are at the end of their service life. See your printer documentation.


Q: What should I do if my printer driver displays the message parts inside my printer are reaching their end of service life?

A: See the Epson Ink Pad Reset Utility page.

Epson Ink Pads Reset Utility

If your product is displaying an end of life service message, please view and complete the required information below to proceed.

Please explain the message I am getting in my printer driver that says parts inside my printer are reaching their end of service life.

Like so many other products, all Epson consumer ink jet products have a finite life span due to component wear during normal use. At some point, the product will reach a condition where either satisfactory print quality cannot be maintained or components have reached the end of their usable life. This is the normal product life cycle for highly mechanical devices like printers. This message is a warning that certain parts have reached the end of their usable life and that your printer will no longer work until it is serviced.

What parts are we talking about?

The message refers to the ink pads, which are actually a number of porous pads in the printer that collect, distribute, and very importantly contain the ink that is not used on printed pages. Ink is collected by these pads during the initial setup of the product, during cleaning cycles and when printing borderless photographs. Most users will not receive this message before the printer is replaced for other reasons. Some high volume users or those who use the printer for many years may receive this message about ink pads before other components reach the end of their usable life.

Why does my printer stop functioning when I get the message?

Epson is committed to ensuring the proper operation of all our devices to minimize the risks of property damage or personal injury during the lifespan of the product. The printers are designed to stop operating at the point where further use without replacing the ink pads could create risks of property damage from ink spills or safety issues related to excess ink contacting an electrical component.

Is there anything I can do to continue using my printer?

Epson recommends replacing the printer, but if you want to continue using it, Epson recommends having the printer serviced at an Epson Customer Care Center. You may also be able to have the ink pads replaced by an independent service provider and use the Ink Pad Reset Utility to reset the Ink Pad Counter to continue using the printer. Please note that replacement of ink pads is relatively expensive and may not be a good investment for lower cost printers because the printers' other components also may be near the end of usable life. Epson does not recommend ink pad replacement by users without technical training or resetting the Ink Pad Counter without replacing the ink pads.

Note: This utility is for Windows XP and Vista operating systems only. We hope to develop an option for Mac users as well; however, we do not have an ETA or the OS requirement at this time.
To download this utility, please complete all fields below, select the agreement check-box and click Download. Required fields are noted with an asterisk(*). Some models may require you to be redirected to another website to finalize the process.

Go here to complete the agreement and download the utility:

http://www.epson.com/cgi-bin/Store/support/InkPadsForm.jsp

Dec 09, 2010 | Epson Stylus 1400 InkJet Photo Printer

1 Answer

We're getting this Service Required message - Parts inside your printer are near the end of their service life. See your printer documentation. What part are we needing to replace?


the parts most likely to be replaced with such a message are the waste ink pads. (sponge pads that collect the ink that is used for print head cleanings). these pads are difficult to reach inside the printer (full dissassembly is necessary) and doing so is a VERY dirty job. i suggest contacting a repair center near you.

Sep 11, 2010 | Epson Stylus Photo RX600 All-In-One InkJet...

2 Answers

Epson stylus cx5500 printer problem


probably refers to empty cartridges
everything has a service life and it could be a possible part that is wearing out and needs replacing

you have 2 options --ignore it untl it stops performing
or get in a service technician

Oct 28, 2017 | Epson Stylus 2200 InkJet Photo Printer

1 Answer

Strange message epson cx8400


Your printer needs to be reset, the part that is near the end of their service life is the waste ink pad, it means that it is almost full, when it's full your printer will stop printing.

Jan 11, 2010 | Epson CX8400 All-In-One InkJet Printer

1 Answer

Parts inside your printer are at the end of their service life. See your printer documentation.


my printer shown the message : your printer are near there ned life prease see your printer document

Dec 08, 2009 | Epson Stylus C46 InkJet Printer

1 Answer

Epson C88 will not print, is flashing both paper and ink lights


I think you need to reset the counter, you can either take it into a epson service centre & have them reset it, or download a programme online.

you just need to google it, just type in service reset C88 that should do the trick.

Nov 06, 2009 | Epson Stylus C88 InkJet Photo Printer

3 Answers

It's is asking service required,


parts inside your printer are near the end of their service life. This is message is coming, how can i do this problem, please tell me

Sep 06, 2009 | Epson STYLUS R230 InkJet Photo Printer

Not finding what you are looking for?
Epson Stylus Photo R300 InkJet Printer Logo

1,066 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18409 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...