Question about Ricoh Aficio 2027 All-In-One Laser Printer

1 Answer

Sc545 code apear after replasing heater unit it is stell what is the sd codes

Posted by on

  • ppsi Jan 25, 2008

    the thermistor is contained in the fusing unit, replacing the fusing unit should fix the problem if the problem is with the thermistor or an obstruction in the unit... there must be some problem with the diagnostic side of the printer... same problem with our printer... replaced the fusing unit and still have the same error code.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 37 Answers

The middle thermoster in the fuzing unit (heater )is out of position or something is obstructing it from reading the temperature on the hot roller , or the thermoster is faulty

Posted on Nov 16, 2007

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: sc545 code

In this case, IT support staff corrected. Not sure what solutions or actions they took.

Posted on Sep 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error code sc545


The Error Code SC542 or Sc546 could be a caused by a few reasons. There is a temperature problem with the fuser unit, the roller thermistor is bad, or the BCU Board is bad.
1 metode to reset Ricoh Error code sc542:
To clear the code:
Hit the yellow "Clear Modes" key
Press 107 on the number pad
Press and hold the "Clear Stop" for 10 seconds until you get a new screen ...
Press the "Copy SP" Button on the display
Open the front door
Turn front left power switch off and on
Shut the door
The error code is now cleared.
reset Ricoh Error code sc542:
To Enter and Exit the SP Mode
1. Press yellow "Clear Modes" key .
2. On the operation panel keypad, press 107 number
3. Hold down red "Clear" key more than 10 seconds.
The Copy SP is displayed.
4. Press "Copy SP" and go to the code SP5810, press "Execute"
5. To exit the SP mode, just press Exit in the upper right corner of the SP mode
screen. Power switch off and on and the error code is now cleared.


Hope this his helps, thanks for using fixya.

Aug 28, 2014 | Office Equipment & Supplies

1 Answer

My copier is apear code E00014


your machine canon iR5000P your Error E00014 i not solve

Aug 21, 2012 | Canon Office Equipment & Supplies

1 Answer

My Akai tv is dead ?


My Akai tv is dead I just replased the power supply.and it stell wont power on what can i do?

Feb 07, 2011 | Akai LCT2701TD Television

2 Answers

Ricoh 410 DN SC545 error code


This is a code for fusion.
Check:
- Thermistor
- Thermostat
- Lamp

Dec 30, 2010 | Ricoh Aficio SP C410DN Laser Printer

4 Answers

Ricoh 3045 printer stopped printing error code SC545


Hello, you´re found problem in the fusion unit. Clean the thermistor, and try again. Before try it, most reset the Sc code with service code....Good Luck!

Feb 08, 2010 | Ricoh Office Equipment & Supplies

1 Answer

Error Code of SC545


That code will not reset by powering off and on. It needs to be reset in the service mode.

Jun 16, 2009 | Ricoh Aficio AP410N Laser Printer

1 Answer

This is the code on the mach sc 545


Hello sir; The code sc545 means fuser unit temperature too low it can be reset;
press "clearmode" "107" and thenpress and hold "clear/stop" key untill display "copy sp" show up, then turn power off and back on.

Apr 09, 2009 | Ricoh Aficio 2022 Black and White Copier

1 Answer

REX ROTARY DSM618 D SC545 ERROR CODE


you have to go into the sp modes to clear this code .pres the yellow c then 107 and hold down the orange c , do this all in sequence , it wil go in the sp modes and show copy sp .enter there and switch the power off wait 5 seconds switch back on

Jul 18, 2008 | Gestetner DSm515pfd Digital Copier -...

Not finding what you are looking for?
Ricoh Aficio 2027 All-In-One Laser Printer Logo

Related Topics:

240 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ricoh Office Equipment & Supplies Experts

Adorjani Laszlo

Level 3 Expert

1297 Answers

quennie732

Level 2 Expert

398 Answers

fares

Level 1 Expert

67 Answers

Are you a Ricoh Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...