Question about Konica Minolta Office Equipment & Supplies

1 Answer

I am getting an error code C0500 after changing the toner. What do I need to do to get the printer back online?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Depends on the model of you Konica Minolta. The CO500 is usually related to fusing temp. It's possible that a power spike or a thunder storm that knocked out power to the building would caused this.

Posted on Jul 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Code error c0500


Open the front door, to the upper left there is a small access remove the plate press the button with the machine on that will reset the c0500 code if it comes back do NOT reset the machine it is telling you that it need fixing continue to do that can destroy boards worse case start a fire. YOU are resetting the code for the Fusing Unit which fuse the toner to the paper. GETS very hot normally.

Feb 07, 2014 | Minolta EP4000/5000 CS/PRO Copier

3 Answers

Error Code C0500


Check the Fuser Unit - the part that heats up and melts the toner to the paper.

clean the contacts for the fuser lamp first.

Oct 13, 2008 | Minolta DiALTA Di250 All-In-One Laser...

1 Answer

Error Codes


Well the C0500 code is the code that is given when the fusing unit is bad (THE HOT PART) to reset that code need to go to the rear remove top rear cover and press the small black button on the control board lower left. The C0400 is Exposure Lamp the bright lite under the big glass. Might need to get a new one try web site below as for the C0500 if it comes back do not reset get Konica Minolta rep to look at the fuser unit. IT can catch on fire and that would ruin a perfectly good day. If parts required see the web site below for a start Precision Roller Printer Toner Cartridges Parts and Supplies Office...

Feb 16, 2012 | Minolta EP1083 CS/PRO Copier

1 Answer

I have Konica Minolta DI2510 with problem coed C0500 & C0f032


You can try to reset the C0500 error code press the soft initialization on the right side of control panel when the dot appears on the lcd after reboot press the number 3 key the mode will change to the initialization screen choose the selection for trouble reset after reboot the code will be cleared power on and of for basic screen if this dose not work you will need to replace the fuser unit
in regards to your c0f32 code the toner to carrier ratio is wrong this is caused by the wrong developer being used clean out developer unit and put correct developer in the unit

Jan 24, 2011 | Konica Minolta Office Equipment & Supplies

1 Answer

My Oce im2520f is giving me an error code: C0500. After about 3 minutes of giving me the error code, it beeps four times (long beeps) and then in shuts off. Anyone have any idea what it might be?


The C0500 error code is a fuser unit error code. The fusing unit is the part that gets hot and "fuses" the toner onto the paper just before it exits the machine. There is a special reset procedure for this code so as to prevent overheat of the fuser. You will need a service technician to diagnose the problem in the fuser and then reset the code. Most common causes are blown thermal fuse, bad thermister or rarely, a bad heater lamp.
Good Luck and Thank You for using Fixya.

Mar 19, 2010 | Office Equipment & Supplies

1 Answer

C0500 error in a minolta Di251


Does the lid over the toner bottle close properly?

Feb 26, 2010 | Minolta Di251 All-In-One Printer

1 Answer

Error code C0500


C500 is a fuser code, the hot part of the machine, the fuser fuses the toner to the paper, so that the toner does not smear off. But to solve this must have the model number. As each series of machine has a different way to reset machine

Jul 21, 2009 | Konica Minolta DiALTA Di200 Copier

2 Answers

Malfunction detected, code CO500 on our printer, model Di251.


my di2010 has a co500 code on it after someone tried to run a transparency thru it.

Jun 25, 2009 | Minolta Di251 All-In-One Printer

3 Answers

IMAGISTICS 2620 Error code C0500


How to reset malfunction code C0500 of a imagistic

Feb 03, 2009 | Konica Minolta DiALTA Di200 Copier

3 Answers

Ep2080 minolta cspro


Ep2080 minolta cspro error code comes up with c0500

Dec 06, 2007 | Minolta EP4000/5000 CS/PRO Copier

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

520 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6161 Answers

Ben
Ben

Level 2 Expert

108 Answers

David Burkhart
David Burkhart

Level 2 Expert

210 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...