Question about Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Open Question

Http://www.ehow.com/how_12088430_removing-U1-code-fisher-paykel-dish-drawer.html after start washing stops and u1 epair

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
Master_Tech
  • 770 Answers

SOURCE: fisher and paykel dish drawer

U1= Machine has failed to prime with water within
approx. 3 minutes
 The water supply is not turned on
 The machine is syphoning
 The spray arm is not in place
 Excessive foaming
 The Inlet Valve has failed
 The electronic controller has failed
 Rotor not fitted correctly

Posted on Aug 05, 2008

Ad
  • 3247 Answers

SOURCE: F & P DD603 starts to wash then beeps &

Have you checked whether you are getting the water supply to the dishwasher. Check if there is no kink in the water hose.

If no problem with water supply then check the water pressure rating is OK for the dishwasher.

Posted on Dec 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is a U1 code


U1 is a filling fault , so you will have to check the water supply into the dish draw is turned fully open and the hose is not damaged or kinked . Ensure the spray arm inside the draw is free to rotate and clean out the strainers inside as well .It would also pay to check the levels on the machine .If you run the dishwasher whilst using water else where the water pressure may also be dropping to much or even changes in temperature may effect it .

Good luck






























































Aug 29, 2014 | Fisher and Paykel Dishwashers

1 Answer

DCS bottom dishwasher drawer u1 code: begins cycle, runs a couple minutes then stops and beeps


Hi there Ypowers, U1 fault code relates to the fill system. Is the tap turned on, is the spray arm position correctly and free to rotate, nothing blocking it?. I hope this helps regards Gary.

Nov 08, 2011 | Fisher and Paykel 23 in. DD-603SS Built-in...

1 Answer

I have fisher&paykel.dishwasher.nautilus, half way through the washing,it beeps non stop and shows me U1 . AND IT DOESNT WORK SO I HAVE TO START ALL OVER AGAIN


Hi,
U1 fault if caused by several things: water supply not turned on (I doubt that), unit is syphoning causing not water in tub to be detected during cycle (this is possible if the drain system in incorrectly installed), spray arm in the drawer is not in place or get moved somehow, excessive foaming (wrong soap or too much), inlet valve failed, controller failed, or rotor not fitted correctly.
I would inspect this issues and locate the reason the unit will not complete the cycle, you may end up replacing the controller in that drawer to fix the problem (as a last resort).
Good Luck

I’m happy to help further over the phone at https://www.6ya.com/expert/gere_bf68e6055dd61249

Oct 11, 2011 | Fisher and Paykel 23 in. DD-603SS Built-in...

1 Answer

Code u1 fisher& paykel model 920


hi, this tells you everything you need to know about a
fisher& paykel model DW820 and DW920 modelsi was also looking for the u1 error, and im sure my problem is being a male i use to much detergent (powder) that creates extra foam :o) oops lol but theres a list of things u1 error could be, i also found a few things out i wanted to know but googled before and found nothing. basically its better than the manual with everything you need to know. have fun.

http://www.fisherpaykel.com.au/admin/pdfs/pdf_usecares/521766I_DW920_ugm_NZw.pdf
if your computer doesnt read pdf files like mine didnt :( when you download and open it, it will ask to check internet for a program to download that reads it, in the list that shows i chose adobe reader 8, works well, anyway this will help im sure from max

Oct 14, 2010 | Fisher and Paykel Dishwashers

1 Answer

U1 Error and Washer Stops Working


Hi,

"U1 error code" means the unit has failed to prime with water within 3 minutes. Its taking longer than expected to fill with water. Check the fill valve,it might be due to water supply problem, or the spray arm might not be in the exact position place.Check the above to fix this error code.

Thank you !!

Jun 22, 2010 | Fisher and Paykel 24 in. DD603H W Built-in...

1 Answer

F & P DD603 starts to wash then beeps & flashes U1 - Fill Fault. I have cleaned both drawers & replaced all parts correctly, still comes up with U1.


Have you checked whether you are getting the water supply to the dishwasher. Check if there is no kink in the water hose.

If no problem with water supply then check the water pressure rating is OK for the dishwasher.

Dec 13, 2009 | Fisher and Paykel 23 in. DD-603SS Built-in...

1 Answer

Dishdrawer DD601 v2 Error F1 on the bottom draw.


Hi,
Below is the link to the service manual
http://www.scribd.com/doc/6462163/DD601V2-Manual
This will be able to explain the problems better that I can in the tiny space I get to write in.
Mat
Please rate me

Mar 15, 2009 | Fisher and Paykel 23 in. DD-603SS Built-in...

2 Answers

Fisher and paykel dish drawer


U1= Machine has failed to prime with water within
approx. 3 minutes
 The water supply is not turned on
 The machine is syphoning
 The spray arm is not in place
 Excessive foaming
 The Inlet Valve has failed
 The electronic controller has failed
 Rotor not fitted correctly

Jun 26, 2008 | Fisher and Paykel 23 in. DD-603SS Built-in...

Not finding what you are looking for?
Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher Logo

Related Topics:

171 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fisher and Paykel Dishwashers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Mark Davis

Level 1 Expert

18 Answers

Bruce Denton

Level 2 Expert

273 Answers

Are you a Fisher and Paykel Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...