Question about NetGear Fs105 Networking Switch

1 Answer

Power up problem

MY CISCO 7912G IP PHNE NOT POWERRD BY NETGEAR FS 108P POE SWITCH.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 375 Answers

Well it should!
Can you get the IP phone to work with any other device? If not, it is the phone, not the switch. If yes...
Reset the switch to factory defaults and try again.

Posted on Jun 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can you run a cico 2901 router with netgear fs728tp switches in a hybrid network environment?


Way make it so hard for yourself? The media converter may be trying to assign a DHCP address in addition to the router.



Hope this helps!

Sep 02, 2014 | NetGear FS728TP-100NAS 24-Port Ethernet...

1 Answer

I have upgraded my 3550 to a 3560v2 48portPOE and can not get my cisco 7940G to power up. The switchport is green but when I look at the power inline log it does not see the phone or that it is a POE...


Are you sure it is a PoE model? The 3650v2 comes in both a PoE and non PoE model.

PoE models: 3560V2-24PS, 3560V2-48PS
non-PoE models: 3560V2-24TS, 3560V2-48TS

Apr 15, 2011 | Cisco 7940 IP Phone

1 Answer

Good day! How Cisco 7911G IP Phone can connect to the Call manager Cisco 7912G IP Phone?


You must have a valid functional callmanager. You then set option 150 in your DHCP which specifies the IP address of the TFTP server which is ultimately callmanager.

Nov 04, 2010 | Cisco 7912G IP Phone

2 Answers

Hello, my cisco ip phone does not start


Confirm if the Phone has power supply. and If it's connected to a POE switch confirm that it connects to the Switch port on the phone.

Oct 14, 2009 | Cisco Computers & Internet

2 Answers

CONFIGURE ip pHONE 7912G


Here is the manual on how to Configure CCME, and this will apply to your 7912G. :)

Apr 24, 2009 | Cisco 7912G IP Phone

1 Answer

Cisco 7912G IP Phone


You can not shut off CCM CSRST fall Back service. You need to either remove SRST reference in the device pool or for the phone specific configuration. I suggest you create device pool similar to one you have but without SRSR reference. Then you need to re-apply device pool in the phoone configuration and restart the phone.

Apr 22, 2008 | Cisco 7912G IP Phone

3 Answers

Inline power problem: cisco ip phone 7941G


You need to ensure that each port that has a phone plugged into it is configured with power over ethernet configured switched on.

Mar 20, 2008 | Cisco 7940 IP Phone

1 Answer

Cisco 7912g sip firmware


firmware can not be e-mailed to you unfortunately. The only way to oficially obtain the software - purchase it

Jan 02, 2008 | Cisco 7912G IP Phone

1 Answer

Netgear fs726tp and cisco phones


that the 7940 and 60
phones from Cisco do not support the IEEE 802.3af Power Over Ethernet
standard
they would work if you
simply reversed the polarity of 2 of the pairs of wire. i.e
by swapping 4 with 7, and 5 with 8 you could use a standard
POE injector to power the phone.
if you have a crimp tool and some cable laying around, you can give it
a whirl and it works. If you aren't familiar with making cable,
don't try this
Basically, you just wire one side of the cable as standard 568b
and then reverse 4 and 7, and 5 and 8 on the other side. Then,
simply plug your Cisco into a standard POE injector and Your phone works.

Nov 16, 2007 | NetGear ProSafe FS726TP Smart Switch...

Not finding what you are looking for?
NetGear Fs105 Networking Switch Logo

Related Topics:

230 people viewed this question

Ask a Question

Usually answered in minutes!

Top NetGear Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18392 Answers

Are you a NetGear Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...