Question about ASUS K8V-VM Motherboard

1 Answer

Wanting two harddisks to work

I have an asus a7vbx-mx and a fuji 20gb. I want to add a western digital 160gb as the slave. Are there any switches to change on the board ?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

You need to change the cap that covers the pins on your drives
Most of them have the way to put them on the instruction booklet or printed on the drive.
Hope it helps!

Posted on Jun 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the jumper setting for wd200bb 20gb hard drive for slave


Slave - Installing the new drive as the secondary drive:
If installing your new Western Digital hard drive as the secondary drive on the cable with
two IDE devices, move the jumper shunt on the drive to pins 3 and 4. If necessary,
configure the jumper on the other IDE device as Master.

May 04, 2011 | Western Digital Caviar WD200BB 20 GB Hard...

1 Answer

Trying to install the drive on my laptop, but it refuses to be seen as anything but the slave drive. How do I switch it to master? It has no jumpers on it.


This is quite strange, since without jumpers you should get a master device, not a slave one. Check with Western Digital 2.5 EIDE jumper sheet:

http://support.wdc.com/images/kb/4-Pin_JumperBlock.JPG

Verify that there are no "stealth" jumpers (small flat ones without the black plastic guard) and that the pins are not bent or shorted.

Mar 18, 2010 | Western Digital Scorpio 160GB Internal...

1 Answer

Where can i vind the Asus A7vbx-mx se vga driver


You can download the drivers from ASUS WEB site. Select your model motherboard, and make sure you select the Windows XP or Vista version of the drivers that matches your Windows operating system. Click on this link: -
http://usa.asus.com/index.aspx

Mar 09, 2010 | ASUS A7V8X-MX SE Motherboard

2 Answers

Reformat


Here is a link from Asus:
http://support.asus.com/download/download.aspx?SLanguage=en-us
You can find drivers for what you need in the link above

Feb 27, 2010 | ASUS P5GC-MX/1333 Motherboard

2 Answers

New sata harddisk not detected


The mother boards from that time you had to install the RAID drivers to use SATA drives. The drive disc which came with the mother board should have the drive, but I would suggest going to ASUS's web site and download the latest drivers. Click the link below, Select which OS (Operating System) you are using, Next click the little + box next to "IDE" and the drivers needed will be listed.
http://www.asus.com/product.aspx?P_ID=xCBogxJhh6yWBQRi&content=download

Jan 26, 2010 | ASUS P4V8X-MX Motherboard

3 Answers

I need ASUS A7VBX-MX SE Driver


Just got to http://support.asus.com/ then go to drivers downloads. select your motherboard.

Sep 23, 2009 | ASUS A7V8X-MX SE Motherboard

2 Answers

How do I add a second HD


Turn the machine off
Open the case
Look to see if there are IDE connector (Wide Flat cable with a connector usually grey)
If this is not present look for a SATA connector usually a small red or blue wire similar to a cat5e network cable
Scew your HDD in place in the rack connect the cable either IDE or SATA
If you have an IDE drive look for a 4 pin female connector from the power supply
If you have a SATA drive look for the connector from the power supply
Once all is connected then reboot you computer typically your bios should auto detect it.

Let me know what happens from here

Sep 19, 2009 | Dell Precision T3400 375W 32bit Computer...

1 Answer

Second Hard drive


it seems like it is not recognizing the hard drive, the error is coming from the cdrom/dvdrom. make sure that the hard drive is jumpered to slave,and the cd/dvdrom is put on the other ribbon cable set at master drive

Apr 09, 2008 | ASUS M2N-MX Motherboard

Not finding what you are looking for?
ASUS K8V-VM Motherboard Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top ASUS Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18391 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

David
David

Level 3 Expert

778 Answers

Are you an ASUS Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...