Question about Leica C3 35mm Point and Shoot Camera

Open Question

"E" flashes when trying to load film.

When I try and load film all I get is an "E" flashing on the screen and nothing else happens...what does that mean? please help.

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
Kimi
  • 277 Answers

SOURCE: Loaded film, but won't work and a "3" is flashing.

The IQ Zoom cameras are designed to display error codes (E0, E2, E9, E10, E1A, E37, E90, HL, H4, H5, etc.) when something goes wrong internally with one of the mechanisms or electronic components. These diagnostic displays help to determine where the problem is. When you see an error code, ask a qualified PENTAX repair technician to examine the camera. For information on a specific error code, call Pentax customer service department toll-free at 1-800-877-0155, Monday-Friday 7:30am-4:30pm, Mountain Standard Time.

Posted on Oct 06, 2005

Ad
  • 36 Answers

SOURCE: leica m6 film stuck, I think

Did you mean you wanted to unload the unfinished film?
What you did then? be more clear and specific about the procedures before I can give you suggestions.

pc-cook

Posted on Jan 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

FEE flashing above where # of pics is showing


Hello

Thank you for using FixYa for your problem

If you get an "E" after loading the film it means that the camera is still Empty and the film has not loaded properly. The most common cause is that the leader has not been pulled out enough past the red mark. I also like to place a sprocket hole on a sprocket tooth (I assume here that the N80 uses a sprocket drive system like other Nikons). When loaded properly the film should advance to frame #1.
Your "FEE" error is something else again and has nothing to do with the film. Apparently the film was properly loaded if you got that also. "FEE" is an aperture error which you get most commonly when you are in one of the auto modes (P or S) and you don't have the lens aperture set to the smallest aperture (largest number, usually f22). Set the aperture ring on the lens to the highest number.

Please rate our solutions and if you still have problems please call back for more ideas to help you

Thanks
Richard Scott
Technical Support
New Zealand

Dec 02, 2009 | Nikon N80 35mm SLR Camera

1 Answer

"ME" flashing on data screen


Hello

Thank you for using
FixYa for your problem


Muilt Exposure mode i think it is
Been a little while sorry

Please rate our solutions and if you still have problems please call back for more ideas to help you

Thanks
Richard Scott
Technical Support
New Zealand

Nov 28, 2009 | Minolta Maxxum XTsi 35mm SLR Camera

3 Answers

I have a Figidaire Affinity front load washer. The problem that I am having is I close the door select wash and then push start and dr is on the screen. Can you tell me what is happening?


dr means the door switch is not closed. Thus meaning the door lock assembly is bad and needs to be replaced.part number is 131763245 and price is $48.99

Nov 01, 2009 | Frigidaire ATF6000ES Front Load Washer

1 Answer

'Err' & 'E"


Is the film loaded correctly? Have you tried reloading it? Also is it flashing DX too? That would mean the film speed is not DX coded so you need to set the film speed manually.

Sep 23, 2008 | Nikon N80 35mm SLR Camera

2 Answers

Error message on camera


I had the same problem, what I did was set ISO to manual,and still got the Err,but I took a shot and the film advanced and it seems to be ok now.

Mar 25, 2008 | Nikon N80 35mm SLR Camera

1 Answer

Canon Sure Shot 105 ZOOM ~TOTALLY LOST ~need any instructions I can get.


The flashing H means hat the camera has detected a hardware fault on starting up. It can also mean that the film has mis-loaded. Try removing the film & then the battery to reset it. Put the battery back & switch on. If it's still doing it then I'm afraid it's got the 'flashing "H" of Doom'. Although this is repairable, it's usually not economically viable.

Jan 11, 2008 | Canon Sure Shot 105 Zoom 35mm Point and...

Not finding what you are looking for?
Leica C3 35mm Point and Shoot Camera Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Leica Cameras Experts

Steven Wander
Steven Wander

Level 3 Expert

593 Answers

Steve

Level 3 Expert

3289 Answers

xalint1
xalint1

Level 2 Expert

152 Answers

Are you a Leica Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...