Question about Epson Stylus C60 InkJet Printer
The printer (Epson C60) only prints on the right side of the page.
Also, the printing device which holds the black and colour cartridges physically hits the printer wall when printing and makes a loud bang. I think it's an alignment problem but I've already done the alignment check and that couldn't fix the problem.
How do I fix this? Thanks!
I am sure your tired of this. It sounds like an HP I had. I ran some thick paper through it and it did the same. I figured that it actually had made the belt which moves the cartridge carriage skip a few teeth. these do not realign automatically. You may or may not be able to do it manually.
You may try to just move the carriage over the opposite direction of where its hitting and see if there si any movement. but it may also not be adjustable. so be careful don't break the thing. after that you are getting it looked at. I was able to move mine over and be trial and error get it realigned and it worked till the drivers were obsolite. hope this helps
Posted on Jun 27, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Jan 16, 2010 | Epson Stylus C60 InkJet Printer
Nov 18, 2007 | Epson Stylus C60 InkJet Printer
First go to your pc and click on file, print when the window opens does it show your printer in there? is it set to THAT printer? does it show as being Ready?
If not re download the driver, then click on File, Print, right click on your printer and set as default.
Next double click on My Computer, ( or click on Start, Control panel, printers and faxes, put your mouse over your printer it should say Ready, if not then change the cable
Sep 20, 2007 | Epson Stylus C60 InkJet Printer
44 people viewed this question
Usually answered in minutes!