Question about PC Desktops

1 Answer

Regarding my desktop screen settings

Hi.. my name is manju... i have a problem based upon my desktop settings...

i use a monitor of LG ( CRT) version - 700E.... by accident it so hpnd that i chngd my settings of the desktop... and now i cannot adjust it properly.... so, can u help me with that???

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 193 Answers
Re: regarding my desktop screen settings

K i think u changed graphic settings like fonts and size of the i-cons like that dont worry manju>do a system restore>like

1. Log on to Windows as Administrator. 2. Click Start, point to All Programs, point to Accessories, point to System Tools, and then click System Restore. System Restore starts. 3. On the Welcome to System Restore page, click Restore my computer to an earlier time (if it is not already selected), and then click Next. 4. On the Select a Restore Point page, click the most recent system checkpoint in the On this list, click a restore point list, and then click Next. A System Restore message may appear that lists configuration changes that System Restore will make. Click OK. 5. On the Confirm Restore Point Selection page, click Next. System Restore restores the previous Windows XP configuration, and then restarts the computer. 6. Log on to the computer as Administrator. The System Restore Restoration Complete page appears. 7. Click OK.
rate me solved if its help full

Posted on Nov 06, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Hi i have a LG 700E CRT monitor i am using this monitor for last 5 years but now i am facing a problem that red color in the monitor is not coming . please assist me regarding this.

The most likely cause is a broken red signal wire in the monitor cable. The next possibility is a bad connection at one end of the cable going to the CRT board inside the monitor. It could also be a thermal-fatigued solder connection in the red cathode driver circuit on the CRT board (this can often be found by visual inspection after removing the CRT board shield).

If you don't find one of those three problems, you'll need to use an oscilloscope to trace the signal from the input cable up to the red cathode terminal. (Caution - high voltage here!)

Dec 27, 2010 | PC Desktops

2 Answers

Left side of screen is dark

Please explain in detail=?

Oct 08, 2008 | PC Desktops

1 Answer

My CRT vintron monitor normal screen became light rose blurr, So plz help me out in this regards.

It sounds like it is out of fucus and may have a line output fault.
LCD screens are really so cheap now that I would suggest that to repair your CRT type monitor is false economy.
Browse ebay or window shop online.

Oct 25, 2010 | PC Desktops

1 Answer

Lg crt monitor power green LED glowing constant. screen is blank

What isthe cost of old CRT 17 inch Black monitor LG Year 2005

Aug 16, 2010 | PC Desktops

1 Answer

Want to replace my small screen with a larger one dell


Going by the fact you have posted this problem under the desktop section the yes of course you can replace the monitor with just about any make you wish.

There are plenty of choices of monitors to choose from out on the market these days and just because you may feel like you want a branded monitor like Dell for example, it doesn't mean that the cheaper brands are worse. In actual fact you will find that lesser known brands are made by companys like LG/Philips.

I also recommend that you get yourself a flat screen LCD monitor as the larger CRT monitors can fail after a while.

Kind regards.

Jun 30, 2010 | PC Desktops

1 Answer

Pc goes to stanby

Way 1.
check the Power options in Control Panel by default the 1. Turn off Monitor : After 20Mins. 2. Turn off Hard disks : Never 3. System standby: Never 4. System hibernates : Never
Way 2. May be your system CPU over hight , it may go standby / restart.
feel free to contact me @ Rgds, manju

Feb 09, 2010 | Dell Optiplex 755 Desktop Desktop Computer...

1 Answer

No post screen, cant access cmos settings. but windows starts as usual just a blank screen til then?

Its possible that your cmos settings were changed prior to this problem so as not to display cmos settings options at boot up. Have you tried resetting your cmos settings to fix the problem? You can do this by a jumper which is usually found on the mother board named "clr cmos" (clear cmos).
Let me know if this is of help or not.

Apr 25, 2009 | Dell Dimension 2350 PC Desktop

1 Answer


right click somewhere on your desktop, than click on properties, go to settings

Apr 16, 2009 | PC Desktops

1 Answer

I have corrupted files in Windows XP and EMachines provides "Restore CDs" But with my NEW LG widescreen monitor the instructions on how to startup the CDs is actually cut off. So when I attempt to load the...

hi there! if you can configure your bios set up and go there, priority yout cd rom as first on the list,2nd your hard drive, in able to start and configure your windows set up promptly.How to open your bios set up,after switching on your pc, press F2 or delete depend on your start up windows appear on left bottom of screen if cmos/bios appear on blue screen select the boot sequence and arange the list of booting up your windows.In your screen resolution this will be adjusted after you finished the windows set up to new xp,you can adjust your scrren resolution, by left clicking on your windows xp on screen,click proreties, on properties box there adjustment of screen resolution there slide function key to 1680 X 1200.then click apply,click ok then restart your pc for effetivity or sometime it was auto restart after you change your screen resolution...,regards

Mar 27, 2009 | E-Machines W3052 PC Desktop

2 Answers

The screen will turn on for an instant and then go blank. If I tilt the monitor forward it stays on.


Based on your description it could be a loose connection. Externally, this could either be the power cord or the video cable, internally, this could be on any of the different connectors or less likely, a cold solder. Depending whether your monitor is the conventional CRT or an LCD, then it could be on the regulator board or the inverter.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

May 26, 2008 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts


Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers


Level 3 Expert

18258 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides