Question about Hampton Bay 24002 Ceiling Fan

Open Question

Windward III ceiling fan

Installed without the remote and found that we have the fan spinning in the wrong direction. What do we need to do to change the direction of the spin. We do not have the remote receiver box installed.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: Hampton bay Windward III

Green and copper are the ground wires and I believe you can connect both these to the green wire from the fan (I only have the copper wire in the actual ceiling box). Black and Red can be treated as both black and both can be connected to the black wire from the fan (this is what I did in all my fans and it worked). White is the neutral wire and can be connected to the white wire from the fan (this is what I did in all my fans and it worked).

My ceiling box has the copper, red, black, and white wires. The ceiling plate for the fan I bought had a green wire. I connected the green wire from the ceiling plate and the copper wire from the ceiling box to the green wire from the fan.

Posted on May 22, 2008

  • 70 Answers

SOURCE: Ceiling Fan only spins 1 speed

assuming you havent messed about with the wireing it can only be the pull cord switch fault or the motor is on its way out

Posted on Jul 25, 2008

  • 1 Answer

SOURCE: fans spinning opposite directions

somethings causing your magnetic drive to atomatically reverse, its probably a defect, i suggest you bring it back and get a new one!

Posted on Aug 25, 2008

  • 10 Answers

SOURCE: Hampton Bay Ceiling Fan Windward II

There is a 4 position (dip) switch on both the fan housing and the remote. Make sure these switches are set exactly the same and the remote will control the light and fan separately. If not, the remote may be getting interference on the preset frequency - try CHANGING the dip switches to a different setting and the remote should work.

Posted on Oct 24, 2008

  • 75 Answers

SOURCE: lost screws to attach fan blades on ceiling fan

This is not a 'promo' for Home Depot but you will find the screws there that you need.
You will need 15 screws, with an 'unfinished' appearance, for the attachment of the five blades to the arms, and 10 screws that have a smooth rounded finish to attach the arms to the motor housing. If they do not have it in stock they can order ot for you.
If you have an electrical fan store in your area you should be able to find the items there as well.
If you have an old discarded ceiling fan, take the screws out of it and try them on your current fan, they should work.
Good luck. :)

Posted on Apr 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have HamptonBay Windward III Model 740 183 fan. I cannot find a replacement remote for it (CHQ8BT7096T) that has orange and blue buttons and upper right button is forward and reverse, NOT fan timer. ...


I found this remote on Amazon for about $40.
https://www.amazon.com/gp/product/B00AM00QJS

If the product is no longer available at the above link, try searching for the alternate version of the model: CHQ7096T

Side note: This question is about a remote control for a ceiling fan, yet strangely found in the "dryers" category.

Nov 26, 2012 | Dryers

1 Answer

My ceiling fan is spinning in the WRONG direction. I know because I have an identical fan spinning in the right direction. How do I get my fan to spin in the right direction? It has been doing this ever...


shut it off, an get up there and see if it has a directional switch, to make it go forward or back wards. also be sure the blades are not upside down on fan motor. the reverse switch should be on the fan motor housing so it can be reversed.

Sep 09, 2010 | Hampton Bay 52 In. White Redington...

3 Answers

Can't figure out how to reverse the Hampton fan with the remote


I have the Hampton Bay Windward II Ceiling Fan SKU 523-127. I have replaced various parts over the years including the ballast, light shade, 9" 30 Watt Circline bulb and the remote.

Hampton Bay Windward II Ceiling Fan SKU 523-127 was sold by Home Depot, and manufactured by King of Fans.

King of Fans website is: http://www.kingoffans.com
This fan can be seen by clicking on Products --> Ceiling Fans --> Click on page 9 (at the bottom of the webpage) then click on the Windward II fan picture, then you will be able to click on Download Owner's Guide.

Mar 11, 2009 | Dryers

3 Answers

Remote control, changed battery, still nothing


There is a a major ceiling fan manufacturer in Fort Lauderdale FL called King of Fans (website: kingoffans.com) that deals strictly with Hampton Bay ceiling fans & parts. They are the Home Depot distributor for Hampton Bay ceiling fans. Their number is 1-800-330-3267. There is also a 1-877-527-0313 number for Hampton Bay products other than ceiling fans...

You can also try ebay for OEM replacement fan remotes for various brands including Hampton Bay...

Nov 25, 2008 | Hampton Bay 24750 Huntington III Ceiling...

1 Answer

NO Reverse switch


That's because they only go one direction.

Aug 24, 2008 | Hampton Bay 24750 Huntington III Ceiling...

2 Answers

Hampton Bay Remote


You must use the switch on the fan itself.

Aug 01, 2008 | Hampton Bay 52 In. White Redington...

2 Answers

Windworld III has mind of its own -- light comes on any time it likes fan changes speed


This sounds like one of the most common problems with Hampton Bay's remote-contolled fans...either the transmitter (remote control) or the receiver (mounted in the fan, typically inside the ceiling canopy) has gone haywire. A circuit has blown or something is short-circuited, and it has a mind of it's own. The only fix is to replace the receiver and transmitter, which are relatively cheap and sold as a pair at your local Home Depot and Lowes.

Hope that helps! If you ave any other questions, feel free to ask!

Jun 14, 2008 | Hampton Bay 24750 Huntington III Ceiling...

2 Answers

Hampton bay Windward III


Green and copper are the ground wires and I believe you can connect both these to the green wire from the fan (I only have the copper wire in the actual ceiling box). Black and Red can be treated as both black and both can be connected to the black wire from the fan (this is what I did in all my fans and it worked). White is the neutral wire and can be connected to the white wire from the fan (this is what I did in all my fans and it worked).

My ceiling box has the copper, red, black, and white wires. The ceiling plate for the fan I bought had a green wire. I connected the green wire from the ceiling plate and the copper wire from the ceiling box to the green wire from the fan.

Dec 29, 2007 | Hampton Bay 52 In. Black Huntington III...

Not finding what you are looking for?
Hampton Bay 24002 Ceiling Fan Logo

Related Topics:

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hampton Bay Dryers Experts

Steve

Level 3 Expert

3287 Answers

Donald Klecher
Donald Klecher

Level 1 Expert

2 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Hampton Bay Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...