My keyboard is locked and the only button that works is the on and off button the red button help me please

The Red Lock indicates that it has been Child Locked, this could be done by accidently pressing child lock. On your remote control there is a MUSIC button, to turn off the red child lock PUSH & HOLD the button. The red lock does not go off with a qucik push. You need to Push & Hold The music button for about 10 secounds.

Read more: How to unlock my logik tv , it has a red lock on the corner with a blue screen and i cannot use my remote or the keyboard to activate the menu ' Answerbag http://www.answerbag.com/q_view/516852#ixzz289vnGLRC

HI,

Please reinstall the drivers of your keyboard.This should fix the problem.

The keyboard has a feature (and associated button) called F-Lock. By default, when the computer boots, F-Lock is turned on. In the F-Lock mode, rather than sending the standard key commands for the function keys, the keyboard sends special alternate commands (like print for F7 and save for F8) that are configured in the iTouch program. In order to force the keyboard to send the standard function key commands, you must TURN OFF F-Lock by pressing the F-Lock button! Oh, and by the way, there are no indicator lights on the keyboard, and the F-Lock button is an always up momentary button - just like the keys on the keyboard, so there is no way to tell what state it is in, other than by pressing it and then pressing an F key to see what happens!

This should solve your problem. Just turn off the F-Lock Mode.
Hope this helps if it does please leave a comment or a vote.
Thanks JHH

Hi,

Connect a usb keyboard and if you don't get the same issue, replace with a new keyboard

Accoring to the problem you have mentioned i am sure the keys are not connected properly. The tab key is connected on the Caps lock key. Moreover make sure you press the fn key to check for any changes as it is the key which helps you toggle in Laptop

Found this little bomb shell after about 30mins of looking for an answer.

http://logitech-en-amr.custhelp.com/cgi-bin/logitech_en_amr.cfg/php/enduser/std_adp.php?p_faqid=9220

To toggle your scroll lock key:

1. Click on the Windows Start button.
   
2. Select Run.
   
3. Type 'OSK' in the dialog box.
   
   
   
   
4. Click on OK.
   
5. The Microsoft on-screen keyboard will open. Notice that the slk, or scroll lock, key (located in the top row of the on-screen keyboard as shown below) is turned on.
   
   
   
6. Click on slk (in the top row of the on-screen keyboard). This will toggle the state of the scroll lock key. Notice that the scroll lock key is no longer outlined in red. Scroll lock is now off.
   
   

NOTE: If you have installed SetPoint (Logitech’s Mouse and Keyboard software) the confirmation message Scroll Lock Off will also be displayed for about 2 seconds on your monitor.



Yipee!!!

1. Click on Start and click on "Run"
2. Type osk and click OK.
3. You will see the On Screen Keyboard (OSK)
4. If the "nlk" button is white, it will be a visible key on your keyboard. Blue is when the key is not visible and the dark blue with the red border when the NumLock is ON.
5. Please make sure the "nlk" button is blue.
6. You will also the display on your monitor when the slk button is clicked or changed on the OSK.

Just had this happen on a K800 wireless keyboard. Went into keyboard settings and *enabled* the caps lock key, turned off caps lock, then *disabled* the caps lock key again. Hope it helps

I dont have a clue what happened...
The screen is blue and has a little red lock on the upper left hand side...
remote only works to turn it on...no other buttons work.
Help please!!!

Normal 0 Press the Receiver button (and the lights will start flashing.
Then if the Keyboard isn't working, press the small RESET/CONNECT button on the back of the board to connect the keyboard to the receiver.

If the MOUSE isn’t working, push the small RESET/CONNECT button on the back of the mouse to connect to the receiver. Then they should work okay.
Hope this helps. Bud