- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Others to try:
10748, 10879, 10767, 10890, 11991, 10889
To program your remote:
Turn on your TV
Using the code list, find the first five digit code that is listed next to the name brand of the TV that is to be programmed
On the Comcast remote, press and release the TV key
On the Comcast remote, press and hold the SETUP key until the TV mode key blinks twice then release the SETUP key
On the Comcast remote, enter the first listed five digit code Note: If this number is entered correctly and is an accepted TV code, the TV mode key will blink twice. If the code is entered incorrectly or is not an accepted TV code, the TV mode key displays one long blink and exits programming mode
Aim the remote control at the TV and press the POWER key once
The TV should turn OFF - if it did not turn off, repeat steps 1-6 with the next TV code listed, until a working code is found
Philips universal remote control cannot be synchronised with Apex Digital TV. There is no code for Apex with it. There are very rare remote controls which have codes with Apex Digital. Comcast On Demand Custom DVR 3-Device Universal Remote Control is one amoung them. Codes for Apex Digital Tv; with this remote are:
0748, 0765, 0767
Buy this one. It can be sychronised with most of the present devices. OK.
this is not a rare problem, the comcast remotes are not only very hard to program, but are even harder to reprogram! you best bet would be to get a universal remote that is rated to work with your comcast box, as well as your tv's...if you get one of the $4 remotes it will not work on the newer tv's. you will have to buy a med to top end remote...or for now just use the factory remotes.
I am having the exact same issue. It started happening within the first few hours of turning on the XBR9 for the first time. I also have a Motorola box from Comcast. This did not happen with the HD TV that was hooked up previously. Did you return the TV?
I just spoke with a rep at Apex about the comcast code for the LD4088 TV. I was told to call 1(800)284-8828 M-F for specific customer service for this TV and that if they cannot help us, the TV may be so new that we may have to wait for the next generation Comcast remote in order to control our TV with a comcast remote. Frustrating. Isn't it?
This is possible a number of ways. Depending on the type of TV you have, it may have audio out on the back of the TV. This will be two jacks that are RED and WHITE, and it should be labeled "TV OUT" or "OUT". Use an RCA audio cable and connect these two jacks to the TV jacks of the same colors on your surround sound unit.
If your TV does NOT have audio out jacks, you can still accomplish this by use of a VCR. Just run your main TV input [coaxial cable from antenna or cable/dish] into the VCR, and then out to your TV as normal. Leave your TV on channel 3 [or 4, or whichever channel the VCR uses]. If you're using a regular antenna, you can switch channels on the VCR. If you're using cable, you should be able to just change channels on the cable box.
This will give you surround sound from an older TV without audio outs. But most larger and newer TVs have an audio out jack on the back.
Hope this helps!