Question about Brother MFC 240C All-In-One InkJet Printer

1 Answer

I lost the manual and need to know what is the lighted setting button to operate printer mode

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,996 Answers

Go here and you can download a manual to your computer. It will have that answer. (Or read it online.)

I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!

Posted on Jun 26, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does service error 5C00 indicate?


Waste Ink Counter Reset due to residual ink in the ink docking station only resolution apart from replacing the printer.

Service Mode: This printer has a service mode for service-related settings and for performing test prints. The operator panel buttons are used to enter the desired service mode.


With the printer powered off (but still plunged in), hold down the "Resume Button" and press the "Power Button" and hold them both down.

While holding down the "Power Button", release the "Resume Button" and then press and release the "Resume Button" twice.
Now release the "Power Button".

The indicator light should blink in green and the printer will make some noises.
You know you are in service mode if the green light stops flashing and stays green.

Select one of the following service mode functions by pressing the "Resume Button" the specified number of times listed below.
Each time you press the "Resume Button" the light will change color to let you know the button was pressed.

1 time = Service test print.
2 times = EEPROM information print.
3 times = EEPROM initialization
(4 times = Waste ink counter resetting)
5 times = Destination settings
6 times = Print head deep cleaning

Then press the "Power Button" one time to perform selected function.

If you press the "Power Button" two times it will take you out of service mode.

To Re-iterate :
You have to be pushing down on the resume button or the printer will just turn on when you press the power button.

Startin over.
Hold down the Resume Button then press the Power Button and hold them both down. The light between the buttons should come on green but the printer should not turn on. If the printer turns on at this point the printer does not recognize that the Resume Button is being pressed.

While still holding the Power Button down release the Resume Button and press it again twice. At this point the green light should change colors each time the Resume Button was pressed.

Then release the Power Button and you should be in service mode.
Once in service mode if you press the power button without first pressing the resume button the printer will turn off

Mar 31, 2016 | Miscellaneous

4 Answers

Manual


goto this website
http://www.genevawatchgroup.com/

Click on customer service, scroll down the center of the page untill you get the user manuals, your manual is there.

let me know if you need anything else.

Thanks,
Ekse

Jul 27, 2008 | Kenneth Cole KC1104 Wrist Watch

1 Answer

Service mode


Which printer model you are using??
Example: For cannon printer follow the given steps....

  • Plug in power cable
  • With the printer power turned off,while pressing RESUME/CANCEL button,press and hold the POWER ON button. (Do not release the buttons)
  • When the Power LED lights in green,while holding the POWER ON button,release RESUME/CANCEL button. (Do not release the POWER ON button)
  • Press RESUME/CANCEL buttons 5 times. (Each time the RESUME/CANCEL button is pressed,the ALARM and POWER LED lights alternately. Alarm in orange and power in green).
  • When the POWER LED lights in green the printer is in service mode and ready for service operations.


***If you need any technical help on printer then you can reach at here

Jan 02, 2013 | Office Equipment & Supplies

1 Answer

I DON'T KNOW HOW TO PROGRAM THE TIMER I'VE LOST THE MANUAL. I NEED TO SET IT MON- SUN FROM 7PM TO 12PM IT SHOWS: 1 ON THIS IS WHERE I HIT HOUR & PUT 7:00PM THEN I HIT PROGRAM IT SAYS 1 OFF I HIT...


You posted under Intermatic HB88RC timer
If you have different timer, add a comment

HB88RC timer manual:
http://waterheatertimer.org/pdf/hb88rc.pdf

Here's HB88RC programming from the top:
Remove batrery from back of timer to reset timer and clear everything.
Re-install AA battery in timer so display will show, and you can program

Set clock:
Hold down clock button.
Press day button until current day displays.
Press Hour button until current hour displays.
Press min button until current minute shows.
Release clock button

Program timer:
Press PROG button until 1 ON displays
This is Event1 ON
Press Day button until selected day or days displays for event1 ON
If you want all week long, then press day button until all days show: MO TU WE TH FR SA SU
Press Hour button until 7pm shows >> this is event1 ON
Press Min button until :00 displays for event1 ON

Press PROG button until 1 OFF displays
This is Event1 ON
Press Day button until selected day or days displays for event1 OFF
Match days with ON time: so press day button until all days show: MO TU WE TH FR SA SU
Press Hour button until 12pm displays >> this is event1 OFF
Press Min button until :00 displays for event1 OFF

When programming is finished, press clock button to display current time

When programming is finished, press MODE button to select MODE > you want AUTO for timer programs to operate
Press MODE button once and this is manual override, and lights come on.
Press MODE button again and RDM displays, this is for random timer operation
Press MODE button 3rd time, and timer is set to AUTO
After setting MODE to auto, press clock button to display current time.

Plug timer into receptacle.
Plug lights into timer.

Add a comment any time.
A lot of folks have written in about this timer going bad and they have been unable to program the timer. Of course most timers work perfectly fine.

Dec 18, 2010 | Intermatic HB88RC - 7-Day Programmable...

1 Answer

I havea mx310 but have lost the manual - how do i set up to scan photos?


You can download your manual from this site:

http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mx_series/pixma_mx310#BrochuresAndManuals

Solution: Setting scan methods for the button (Windows) - MX310

Scanning using the Operation Panel

You can scan documents using the operation panel.
Important

bullet.gifDo not disconnect or connect the USB cable while the machine is in use.

bullet.gifIn Windows XP, the program selection dialog box may open when you press the Color Start or Black Start button on the machine for the first time. In that case, select MP Navigator EX, then select Always use this program for this action and click 'OK'. From the next time, MP Navigator EX will start automatically regardless of the selected scan mode.


arrow.gifSelecting a Response to Commands from the Operation Panel


1. Place the document face-down on the platen.



2. Press the Scan button on the machine.


The machine enters Scan Mode.



3. Press the Color Start or Black Start button on the machine.



MP Navigator EX starts on the connected computer. Scan documents on the platen or ADF (Auto Document Feeder) using MP Navigator EX.

Trust this is helpful.

Dec 14, 2010 | Canon PIXMA MX310 All-In-One Printer

3 Answers

How to set time Casio W-89H two button watch


Actually, the watch has 3 buttons -- "Light" being the 3rd one. Press Mode until a number in the time mode begins flashing. Then press the Light button to get it to the hour indicator. Use the 12-24 Hr button to set it to the current hour. Then press the Light button again to get it to the minutes section. Again, use the 12-24 Hr. Button to set it to the next minute coming up in the current time. Then push the Light button again. This will bring up the seconds indicator. At the precise time the minute you set before begins, hit the 12-24 Hr. button, and the indicator goes back to zero and begins ticing away. Then hit the Mode button again until the watch is in the current time mode. Hope this helps. I use Internet time to set a precise time.

Jul 17, 2009 | Casio Watches

1 Answer

I want to know how to solve the 5202 error please help me ,my printer is canon pixma ip 1200


Try resetting the printer:

Go into the Service Mode
This printer has a service mode for service-related settings and for performing test prints. The operator panel buttons are used to enter the desired service mode.
Service Mode Operations
1) With the printer powered off, hold down the resume button and press the power button.
2) While holding down the power button, release the resume button and press the resume button twice in succession. Now release the power button. The
indicator will blink in green and remain lit in green.
3) Select one of the following service mode functions by pressing the resume button the specified number of times.
Press Resume Indicator Functions
Zero times Green Power off the printer
1 time Orange Service test print
2 times Green EEPROM information print
3 times Orange EEPROM initialization
4 times Green Waste ink counter setting
5 times Orange Destination settings
6 times Green Print head deep cleaning
7 times Green CD-R test print
8 times Orange CD-R print position correction (horizontal)
9 times Green CD-R print position correction (vertical)
4) Execute the function you have selected (except for model setting) by pressing the power button. The printer will switch itself off after performing the function

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

May 10, 2009 | Canon Office Equipment & Supplies

2 Answers

Lost key operator code for Sharp Copier AR-M207.


The default is 00000

Simulation 22 - 07 will display the Key operator code.

Perform the following procedure to enter the simulation mode.
"#" key -> “*“ (star) key -> "C" key -> “*“ (star) key (do this in quick sequence order, the display should change, then enter below)

Main code {22} ->
(Green Copy Button) Start key ->
Sub code {07} ->
(Green Copy Button)Start key

Press the "CA" button to go back to Copy mode.

Jan 24, 2009 | Sharp AR-M237 Copier

1 Answer

Calibration


If the media sensor is positioned correctly and the printer is set for an autocalibration on power up and printhead close a manual calibration is not really needed. However, here is the information that is the easiest way to run a manual calibration.

Manual Calibration

With the printer at a ready state, press the MODE button two times or until the CALIBRATE light comes on.

Press the FEED button.

Once this is complete press the MODE button four (4) times to save these settings.

Mar 07, 2008 | Zebra Stripe S600 Thermal Label Printer

Not finding what you are looking for?
Brother MFC 240C All-In-One InkJet Printer Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

James Cagle
James Cagle

Level 2 Expert

455 Answers

Samyfam
Samyfam

Level 3 Expert

379 Answers

Are you a Brother Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...