Nothing work in my oven, I can only see the time but anything else. What can I do?

Check online for your oven and it might show different problems with that type. Also, my oven did that and it was just the heating element on the bottom. The top one was working okay. I looked on Amazon and found the right one by range model #. It only costs about 20.00 and easy to install. If that isn't the problem, it might be the wiring in the back. If that's the case I would call someone.

werew

Model: PT956SR2SS GE double wall oven has "LOC rEF" code Press 6 & 8 at the same time to resolve this issue

you have to set the clock befire anything works .if you have done that its could be that the element has failed and the fault current has damaged any of the contacts in the circuit which can be themostat ,timer contact thermal cut out contacts. failure of the timer contacts would leave nothing working

Unfortunately this seems to be a problem with several of the jenn air models. I have replaced quite a few and have also talked to thier tech line for servicers and they don't have anything else to offer other than replacing the control board. Each time I ran across one I found no other problems and I tested everything. If you replace 3 times you can usually get them to give you a new one.
www.appliancehelponline.com

the display board itself would be the culprit,the part might be under warranty,if under 5 years consult manual or manufacturer for coverage....the part is probably expensive

Sounds like a touch pad (if GE brand).
GE oven repair in orange county, ca
appliance repair orange county, ca

this will show you in the video
Candy Oven not heating? How to replace a Candy fan oven element
This video will show you how to replace fan oven element in your
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question.

programmer needs replacing.

My solution for the F7 problem may work for you. It won't cost you anything to try it. It is simple and free. You can find it at the following link:

http://www.fixya.com/howto/h155060-dreaded_f7_error

Please let me know if this works for you. You can email me at:

[email protected]

Good Luck,
Powerman