Remote model no AR-JE11 is not working what should we do

Videos

https://www.google.com/search?q=ar-rah2u+change+fahrenheit+to+celsius

Text article.

fujitsu change from farenheit to celcius - Air conditioners

https://forums.whirlpool.net.au > archive
Dec 25, 2015 - "how change farenheit to celcius, remote control unit model ar-rah2u Turn off the remote, hold down the temp raise button until you see the .

There are some other Fujitsu models that will work but not all. The remote controls from Fujitsu themselves are not too expensive if you want a genuine one. Call them for a replacement or try a cheap universal remote from somewhere like ebay or Aliexpress.

I find that most remotes from the same manufacture work on different models. Fujitsu is big enough where I think its worth a try.

Go online for your product to find the codes. Follow the universal remote instructions to program it for your TV.

Some remotes are easier than others. A list of TV brands should have been included with your remote. You can also go online for the remote and get the codes, too.

You can use a model universal N828

Need to buy an air conditon remote control unit model AR-DJ2

Sounds like the remote, I do believe any remote can control any head unit.

If you need further help, reach me via phone at https://www.6ya.com/expert/thomas_092728000e6acb79

How to operate remote of ogeneral model:AR-JE11

Remote control unit are not working. I would like to buy one remote control. I live in dhaka, Bangladesh so how can I buy it? Model No: AR-JE11 for General AC 1.5 Ton Window type. My AC is working by manual on and off.

If your remote control have display but cannot transmit signal to the unit. Confirm first if the remote is really the problem, using your camera or cellphone camera as your eyes point the remote transmitter to your camera and "on" the remote. You should see light emits in your remote control, if no emitted light then the remote control is defective. But if there is a light the defect is in the unit receiver.

Check also if there is a reset or rst button in your remote control and reset it and try.

Check also if there are error codes in the unit, reset the unit by disconnecting the power supply in the unit for 10 sec. and "on" again and try.

The unit can be operate without remote control, use the manual button located in the unit.

If the remote control have no display replacement of remote is recommended.