Question about Pioneer PDP-5060HD 50 in. Plasma Television

2 Answers

Pioneer Elite 1130HD

I have a very small green dot on my screen, is there a way to fix this pixel?

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 22 Answers

Yes, but you might break it if you tried. One way would be to burn the green pixel out but that would require quite a bit of technical knowledge, but then you would have a dead pixel, but that's hardly noticable most of the time. The other way would be to heat the screen up [dangerous for your TV] to try and 're-shape' the address wire that sends the voltage to that pixel.

The other way that you could try is to shake the set, move it around, tap the area *lightly*. This can dislodge a tiny little bit of contaminant that might have been lodged in that particular pixel cell ('rib') which can sometimes settle in a particular way that will cause disturbances within the electrical plasma properties and show the pixel as 'shining'.

Or, since Elite is a premium brand, ask your dealer / Pioneer what their acceptable limit for this condition is.

Posted on Jan 11, 2008

Ad

DAVE-UNFORTUNATELY ONE PIXEL IS STUCK ON AND TO FIX THAT PROBLEM WOULD MEAN REPLACING THE WHOLE PLASMA PANEL ITSELF.JOE TV

Posted on Dec 06, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Pioneer pro-1130hd no image top half of screen which board does this issue point to the x or y drive


X is for all display lines

Y is for individuals.

Go for Y board since half screen is working.

Feb 18, 2016 | Pioneer PRO-1130HD 50 in. Plasma...

1 Answer

Why do I have green dots in the middle of the viewing area on my Pioneer Elite plasma flat screen?


Usually this is a issue with the main or processing board in the set but can strangely also be a power supply issue.

Causes include but not limited to: a voltage changing in the unit, a loose or bad connection on any board or if across entire screen even inside the display panel itself.

I would contact Pioneer to see if this is a known issue with this model. In our shop have been in this situation before and sometimes it ends up being---changing boards until you correct it.

Oct 22, 2012 | Pioneer Elite PRO-1140HD 50 in. Plasma...

2 Answers

A small white dot like spotlight appears on my laptop screen. how to make set it alright.. please do suggest me


Hi there, That Dot is a dead pixel on your Laptop Screen and it cannot be repaired except if you have the screen replaced.
regards,

Jul 28, 2011 | Computers & Internet

1 Answer

Why got green dots / image seen on screen?


Those green dots are dead or "tired" pixels. The only thing you can try to fix this, is doing a pixel massage. Grab a pen and put some sort of towel over it and make a circling move over the pixel.

If it won't work the only thing you can do is get used to it that you have a dead pixel. ( i also have one. Very annoing)

May 21, 2010 | Philips 42FD9932 42 in. Plasma Television

1 Answer

Connecting my comcast hd cable to my pioneer elite hd 1130


you will need the other cables. Hd tv won't work with the old school hookups. rca jacks' can sort out those frequencies

Jan 28, 2009 | Pioneer Elite PRO-1140HD 50 in. Plasma...

1 Answer

Pioneer Elite shows pixels at the top of the screen


There may be a failure starting in the matrix drive board, or in the display itself. The area of failure can be verified with proper troubleshooting by swapping modules. These sets are mainly serviced by swapping modules, and then calibrating as required.

Considering the age of the set parts and modules may be difficult to find. Also, these sets are fairly expensive to service. Because of the age of the set reliability will be low even after service.

I would be seriously considering that it is time to start shopping for a new set when the fault becomes intolerable.

Jerry G.


Jan 10, 2009 | Pioneer Elite PRO-1140HD 50 in. Plasma...

1 Answer

Help with Pioneer Elite Pro-1130HD 50 inch


just wait it, because it is processing the display data

Nov 16, 2008 | Pioneer Elite PRO-1140HD 50 in. Plasma...

1 Answer

Green and Blue spots on screen


Sounds like stuck pixels, you really can't fix that. Do some google research if you are curious what a stuck pixel is.

Oct 30, 2007 | Panasonic PT-50LC13 50" Rear Projection...

Not finding what you are looking for?
Pioneer PDP-5060HD 50 in. Plasma Television Logo

345 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75169 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jaime Hernandez

Level 3 Expert

2334 Answers

Are you a Pioneer Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...