Question about ASUS Eee 4G Notebook

1 Answer

When I type a web address, my letters turn into numbers. it will not let me type what I want, the letters change to numbers

Posted by on

  • michael_schi Jun 26, 2009

    No luck.. when I type the letter "w", "w21" displays, when I type the letter "e", e43" displays. It does this when I am entering a web address or even when I am trying to type a document with OpenOffice.org

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Check to see if you have a key stuck half way down

Posted on Jun 26, 2009

  • dzupinya2000 Jun 26, 2009

    check to see if you have a key stuck half way down

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to write letter verifing address


Instructions
    • 1Before you begin, set your marginicon1.png 1 inch from the top, 1 inch from the bottom, and 1.25 inches on both sides.
    • 2If you're using letterhead, there's no need to type in your name and address. If you're using plain white paper, type in your name, address and phone number (phone number is optional), centering the text. Make the font in this portion of the letter slightly larger than the rest of the text. You should also type your name, address and phone number in boldicon1.png type.
    • Sponsored Links
    • 3About four lines down from your name and address, type the date in full after strikingicon1.png the "Tab" key seven times to bring you a little further than the middle of the page. The date should be typed in full like this:
      February 1, 2009.
    • 4Four or five lines down from the date, at the left hand margin, type the name and address of the person you're sending the letter to. This portion of the letter is called the inside address. If the person you're addressing the letter to has a title, type his or her name first, then type in a comma, space once and type in the title, such as:
      Jamie L. Mulligan, Manager
    • 5Two lines down from the inside address, strike the "Tab" key seven times and type in the subject line. The subject line tells the recipient what the letter is about. In this case, it should look like this:
      Re: Verification of address
    • 6Two lines down from the subject line, type in the salutation. The salutation could be Dear Sir, Dear Ms. Mulligan, Gentlemen, or To Whom It May Concern (if you don't know the name of the contact person). The salutation should look like this:
      Dear Ms. Mulligan:
    • 7Two lines down from the salutation start the body of your letter five spaces in from left margin. The body of your letter should start out saying something such as:
      I am writing you this letter to verify that 101 Washington Street, Lynbrook, New York 11593 is the address I should ship your order to.
    • 8Two lines down from the body of your letter, after striking the "Tab" key seven times, type in a complimentary closing such as:
      Very truly yours, or
      Sincerely
    • 9Four lines down from the complimentary closing and in line with the complimentary closing, type your full name in, like this:
      Jamie L. Mulligan
    • 10Sign your name in the space between the complimentary closing and your typed name.


Read more: How to Write an Address Verification Letter ' eHow.com http://www.ehow.com/how_4745362_write-address-verification-letter.html#ixzz2DRXhelUj

Nov 27, 2012 | Computers & Internet

Tip

Short cut keys for Blackberry phone,storm,curve,pearl.bold


Typing shortcuts keys for BlackBerry

These shortcuts keys can be used when typing text in Blackberry:

  • If you want to type the alternate character on a key, hold the Alt key and press the character key.
  • For an accented or special character, hold the letter key and roll the trackball left or right. Click a selected character.
  • To type a symbol, press the Symbol key. To view more symbols, press the Symbol key again. Type the letter that appears below the symbol to insert the corresponding symbol.
  • To insert a period (.), press the Space key twice. The next letter is capitalized.
  • To capitalize a letter, hold the letter key until the capitalized letter appears.
  • To turn NUM lock on, hold the Shift key and press the Alt key.
  • To turn NUM lock off, press the Alt key.
  • To insert an at sign (@) or a period (.) in an email address field, press the Space key.
  • To type a number in a number field, press a number key. You do not need to press the Alt key.
  • In order to type a number in a password field, hold the Alt key and press the number key.
  • To type a letter in a number field, hold the Alt key and use the multi-tap input method to insert the letter.
  • If you are typing input languages, hold the Alt key and press the Enter key. Select a language, then release the Alt key.
Know more about Windows 7
Windows 7 keyboard Shortcuts


on Dec 05, 2009 | Cell Phones

Tip

How to use Blackberry as a modem to acces internet?


Typing shortcuts keys for BlackBerry

These shortcuts keys can be used when typing text in Blackberry:

  • If you want to type the alternate character on a key, hold the Alt key and press the character key.
  • For an accented or special character, hold the letter key and roll the trackball left or right. Click a selected character.
  • To type a symbol, press the Symbol key. To view more symbols, press the Symbol key again. Type the letter that appears below the symbol to insert the corresponding symbol.
  • To insert a period (.), press the Space key twice. The next letter is capitalized.
  • To capitalize a letter, hold the letter key until the capitalized letter appears.
  • To turn NUM lock on, hold the Shift key and press the Alt key.
  • To turn NUM lock off, press the Alt key.
  • To insert an at sign (@) or a period (.) in an email address field, press the Space key.
  • To type a number in a number field, press a number key. You do not need to press the Alt key.
  • In order to type a number in a password field, hold the Alt key and press the number key.
  • To type a letter in a number field, hold the Alt key and use the multi-tap input method to insert the letter.
  • If you are typing input languages, hold the Alt key and press the Enter key. Select a language, then release the Alt key.

on Dec 05, 2009 | Cell Phones

1 Answer

Dir-615 router wants a username and password to access webpage. I do not have that. I tried reset button 10 seconds on back of router. I tried admin. no luck!


Step 1:
Open a web browser such as Internet Explorer.
Step 2:
Go to the Address bar and enter your router's IP Address ("192.168.1.1" is the default IP of most Linksys routers) then press [Enter].
3714-015.pngNOTE: If the IP address of the router has been changed, type the router's IP address in the "Address" bar instead.
The router's IP address can be changed by:
  • Running the router's setup CD.
  • Changing it on the router's web-based setup page.
If you forgot the router's IP address you can:
  • Check the router's IP address.
  • Press the Reset button at the back of the router for 30 seconds.

    NOTE: This procedure will reset your router to factory defaults. Any settings on the router will be erased. The router's IP address will be "192.168.1.1" and the password will be "admin".
Step 3:
A new window will prompt for a User name and Password. Leave the User name space blank, type in your router's password ("admin" is the default password), then click OK.
3695-005.png NOTE: If the password of the router has been changed, type the router's new password in the Password field instead.
The router's password can be changed by:
  • Running the router's setup CD.
  • Changing it on the router's web-based setup page.
Step 4:
When the router's web-based setup page appears, click the Wireless tab and select the Wireless Security tab.
Step 5:
For the Security Mode, select WEP.
Step 6:
For Encryption select 104 / 128-bit (26 hex digits).
Step 7:
For the Passphrase, type a wireless network password of your choice such as "MySecretKey," then click Generate.
NOTE: Your password should be unique and can be a combination of numbers and letters of up to 16 characters.
Step 8:
For the TX Key, select any number. This will determine which key you'll be using. In this example we selected number 1.
Step 9:
Copy Key 1 as this will be the key to your wireless network

Now try , this should work..
thanks for rating good luck

Jan 15, 2011 | Computers & Internet

1 Answer

I need to change my nat type from moderate to open so i can connect to my friends on call of duty black ops for ps3






In order to configure this, you need to know:

- The IP address of the computer or device to have the port forwarded to.

- The port numbers to be used and whether these are TCP or UDP ports

(Note: We recommend you use a computer that has a wired connection to the router.)

Setup steps:

  1. Open a Web Browser on the computer. Type in http://192.168.2.1
  2. In the address bar of the Web Browser type Click Login in the upper right hand corner of the page. The router does not ship with a password, so just click submit.

login.jpg

  1. Click on Virtual Servers under Firewall in the menu on the left

firewall_vir_ser.jpg

  1. Enter the following information
    • In the description box type the letters X,INBOUND PORT - 0&SELECT TYPE BOTH ,PRIVATE IP ADDRESS IS - 192.168.2.15,PRIVATE PORT IS - 65535

  2. AND DISABLE FIREWALL

routerports.gif



  1. Click the Apply Changes button

Jan 11, 2011 | Computers & Internet

1 Answer

Hi, i have already installed and all is running fine however i didn't secure the network and now need to add a password how would i do this ?


Step 1:
Open a web browser such as Internet Explorer.
Step 2:
Go to the Address bar and enter your router's IP Address ("192.168.1.1" is the default IP of most Linksys routers) then press [Enter].
3714-015.png

NOTE: If the IP address of the router has been changed, type the router's IP address in the "Address" bar instead.

The router's IP address can be changed by:

  • Running the router's setup CD.
  • Changing it on the router's web-based setup page.

If you forgot the router's IP address you can:

  • Check the router's IP address.
  • Press the Reset button at the back of the router for 30 seconds.

    NOTE: This procedure will reset your router to factory defaults. Any settings on the router will be erased. The router's IP address will be "192.168.1.1" and the password will be "admin".

Step 3:
A new window will prompt for a User name and Password. Leave the User name space blank, type in your router's password ("admin" is the default password), then click OK.
3695-005.png NOTE: If the password of the router has been changed, type the router's new password in the Password field instead.
The router's password can be changed by:

  • Running the router's setup CD.
  • Changing it on the router's web-based setup page.
Step 4:
When the router's web-based setup page appears, click the Wireless tab and select the Wireless Security tab.
Step 5:
For the Security Mode, select WEP.
Step 6:
For Encryption select 104 / 128-bit (26 hex digits).
Step 7:
For the Passphrase, type a wireless network password of your choice such as "MySecretKey," then click Generate.
NOTE: Your password should be unique and can be a combination of numbers and letters of up to 16 characters.
Step 8:
For the TX Key, select any number. This will determine which key you'll be using. In this example we selected number 1.
Step 9:
Copy Key 1 as this will be the key to your wireless network.
Step 10:

Click 4058-005.jpg.

If you need more help come back.Post / thumbs / testimonial are welcome!

Nov 19, 2010 | D-Link DIR-615 Wireless Router

1 Answer

Can i secure my network using wrt54g? some unknown user is accessing my network. How can i have security on my network? thanks.


To secure your Linksys WRT54G wireless router, follow these steps:
  1. Open your Internet browser and enter the following in the address bar: http://192.168.1.1.
  2. Note:

    If you have changed the IP address of your wireless router, enter that into the address bar. By default, the address is 192.168.1.1.

  3. Enter the user ID and password for your router. If you haven't changed it, the default password is "admin". We will change it later if you haven't already changed it.
  4. You should now see the "Basic Setup" Web page display in your browser. Scroll down the page until you see "Maximum Number of DHCP Users".
  5. This option will assign a specific number of IP address to computers. If more than this number of computers tries to connect to your router, they will not be able to.
  6. Count the number of computers that will connect to the router, and type it into the "Maximum Number of DHCP Users textbox".
  7. Scroll down to the bottom of the Web page and click "Save Settings". Once the settings have been saved, click "Continue" to return to the Web page.
  8. At the top of the Web page, click the "Administration" option in the menu bar.
  9. On the "Management" Web page, you should see two password text boxes. This is where you should change your administrative password. Type in a new secure password into both boxes.
  10. Once you have changed your password, click "Save Settings" at the bottom of the Web page.
  11. You may be prompted to login again, if you are then enter you new password in the password field.
  12. Navigate back to the "Management" Web page by clicking the "Administrative" option in the menu.
  13. We will now encrypt your connection to your router setup from your computer. To do this click the "HTTPS" checkbox next to the "Access Server" option.
  14. Once again, click the "Save Settings" button at the bottom of the Web page.
  15. You won't get the settings saved page again because the URL in the address bar is not longer correct. Since you have changed your connection to HTTPS, it you need to specify that in the address when you connect to the router setup.
  16. In your browser, change the address to: https://192.168.1.1.
  17. If you get a security error, ignore the error and continue to the Web page.
  18. Login with your password and then click the "Wireless" menu option.
  19. Beside the "Wireless Network Name (SSID)" option, type in a name for you network connection.
  20. Click the "Save Settings" button and the "Continue" button to return to the "Basic Wireless Settings" page.
  21. Click the "Wireless Security" sub-menu option at the top of the page. This is where we will provide the most important security setting.
  22. Next to "Security Mode", select "WPA - Personal" from the drop-down list. If you have trouble connecting to your wireless connection, you can try selecting "WEP", but your connection will be much less secure.
  23. Next to "WPA Algorithms", select "AES". Once again if you have trouble connecting to your wireless router, select "TKIP".
  24. Now you must get very creative. Specify a long "WPA Shared Key" with a mix of upper and lower case letters, numbers and punctuation.
  25. Make sure you write down this key somewhere, either on a piece of paper or in a text document on your computer. You will need this information when you connect to your wireless network.
  26. Click the "Save Settings" button at the bottom of the Web page, and then the "Continue" button.
Now you are all done securing your wireless router and network. All you need to do is connect to your network, and enter your "WPA Shared Key" exactly as you specified it

Sep 23, 2010 | Linksys Wireless-G WRT54G Router

1 Answer

Connect connect my archos 605 with WEP address!!!


i have a 20 to 30 digit wep key and i just changed the settings to 128 bit and made it a hexadecimal wep. (hexa- ?) it should work.

May 19, 2009 | Archos 605 WiFi Digital Media Player

1 Answer

How do I secure my D-Link Air Plus Xtreme G DI-624 wireless route


If you want to secure the router itself you have to launch your web browser. Type in the router's ip address on the address bar. Admin is the default username and leave the password field blank. Click on the Tools tab then make sure that Admin is highlighted to the top left corner of the page. Then change your administrative username and password on that page and click apply.

If you want to secure your wireless network. you have to launch your web browser. Type in the router's ip address on the address bar. Admin is the default username and leave the password field blank. Click on the Home tab then click on wireless to the right of the page. Make up something for your ssid. Select enabled for wep. Then delete the all zeros on key 1 and make up something for your password. Make sure that your password is 10 digits and you can only use numbers from 0-9 and letters from a-f. then click apply.

May 02, 2009 | D-Link DI-624 Air Plus XtremeG Wireless...

1 Answer

How do I use the Remote Management feature on my router?


Remote Management allows the device to be configured through the WAN (Wide Area Network) port from the Internet using a web browser. Step 1 Log into the web based configuration of the router by typing in the IP address of the router (default:192.168.0.1) in your web browser. The username is admin (all lowercase) and the password is blank (nothing). Step 2 Click the Tools tab and click the Admin button. Step 3 Select the Enabled button to enable Remote Management. In the IP Address field type in the public IP address you wish to manage the router. Note: If you don´t know the IP address or wish to allow more than one IP address to manage the router then put an asterisk (*) in the IP Address field. You cannot enter an IP range. Step 4 By default the port used to Remote Manage the router is set to 8080. Change the port number by selecting the down arrow next to the Port Number drop down menu. Step 5 Click on Apply and then click Continue to save the changes. To Remote Manage the router you will need to type in the Public IP Address of the router in your web browser along with the Port Number (separated by a colon) you selected in Step 4.

Feb 16, 2006 | D-Link Express EtherNetwork DI-604 Router

Not finding what you are looking for?
ASUS Eee 4G Notebook Logo

177 people viewed this question

Ask a Question

Usually answered in minutes!

Top ASUS Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18390 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

David
David

Level 3 Expert

778 Answers

Are you an ASUS Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...