Hi i cannot find my manual and my smart panel was disabled i have a samsung clp 315 the red light is on where the arrows face outward i have checked all cartidges and no paper jam, i have unplugged and replugged

Pull the AC plug wait 30 seconds or so, plug in. You can find a user manual here: http://www.samsung.com/us/support/owners/product/CLP-315/XAA

my samsung clp 315 Red light blinking & in printing a Horizantal line is came in centre of the paper

What does the Samsung Smart Panel say? It normally tells you what the problem is. Is the waste toner container full? If so, the printer does not work untill you empty it and put it back. You do not need to buy a new waste toner container. This is my third CLP-310/315 so I know what I´m talking about. The problem with the Samsung Smart Panel is that it uninstalls itself and the icon disappears and you must then ask the computer to repair it. When the Samsung Smart Panel is not working, of course you have no information about what is wrong in the printer. This has happened to me three times.

What does the Smart Panel say? It normally tells you what the problem is. Is the waste toner container full? If so, the printer does not work untill you empty it and put it back. You do not need to buy a new waste toner container. This is my third CLP-310/315 so I know what I´m talking about. How can I make these letters s smaller? [email protected]

The problem with the Samsung Smart Panel is that it uninstalls itself and the icon disappears and you must then ask the computer to repair it. When the Samsung Smart Panel is not working, of course you have no information about what is wrong in the printer or info about toner levels. This has happened to me three times. This is my third CLP-310/315 so I know what I´m talking about.

dear install a smart panel software from samsung. com
which will give exact error. and after getting exact error the problem may be solved

Hi,

you may want to run a repair on the printer driver. by going to windows START -> all programs -> Samsung CLP 310 -> Maintenece - > repair and follow the onscreen next till finish.

this could help some time when you swap USB cable or port or PCA main been replace or updated.

It is a color laser printer.it has 4 toner cartridge(1)black(2)magenta(3)cyan(4)yellow all cartridge is missing or toner finished.Please purchase full set toner.All toner cartridge has a image sensor.When toner is run out then it is out of work.

Low heat error comes from the fuser unit, there is a thermostat on the fuser change that and it will work