Question about Canon PIXMA MP600 all-In-One InkJet Printer

1 Answer

Mp600 6A00 error tried all manual fixes nothing works, not under warranty, ended 3 Mo.

Posted by on

  • kittadog Jun 26, 2009

    sorry but don't know much about this . opened up , to where ink cart. are, can't see pads? am I in the right place. duh ? Sorry



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 2,306 Answers

6A00 means the purge assembly is stuck, it usually sticks because of ink dried on the rail for the squeegee part. If you look to the far right you should see the 2 pads that come up to the printhead to clean and the wiper that should slide back out of the way and the two get stuck together. A damp Q-tip can clean the ink on the rails and allow the wiper to move freely again. A new purge unit is around $30.00

Posted on Jun 26, 2009

  • Craig Gillette
    Craig Gillette Jun 26, 2009

    The unit is under where the carriage parks on the right. If you can't move the carriage because it is locked in place, you will probably need a shop repair. I would try to call Canon at 1-800 OKCANON and see if they will extend your warranty for this problem. It is a known problem with this model printer. If you catch them in a good mood they will give you an exception code for the repair.



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a cell phone not a digital camera Samsung model SCH-r250and I am having a DSP error. I have tried the soft reset and it is not working can anyone help

DSP ===> Digital Signal Processor

Nothing that you can do to fix this error, except to replace the phone either under warranty, or at your personal (non-warranty) expense.
Did you purchase "accidental damage coverage" when you purchased the phone?

Oct 23, 2014 | Cell Phones

1 Answer

I get no display on the monitor and there are no error beeps

Plug in a working external monitor to the video output of the all in one. If that works then the internal monitor is ng. If the plugged in monitor also does not work then the video circuits are shot. Too expensive to replace the internal mo bo - you get ripped off on mo part cost and labor. Replace unless under warranty.

Nov 22, 2013 | HP Omni 100-5050 20" 1.8G3GB 500GB...

1 Answer

At turn on it gives a window error i have a windows 7 version on it i tried fixing the errors with the options it has but nothing seems to work

If you get a blank screen here's the steps below, if this is not the issue, please ignore it. Please let me know the exact error so that I can give you a solution.

Mo Bradley consumer advocate advises on how to save money and side step rip offs.

You turned on your laptop and horrors upon horrors, the screen is BLACK! You see that the laptop has power but besides that nothing is happening. I want you to know that there is a very good chance you can get out of this situation quickly and without any cost. This fix works on all brands of laptops:

Mo Bradley says do this:
• 2) REMOVE YOUR AC ADAPTOR CORD, that's the wall power, remove it.

2.That will drain any static electricity that has built up on your laptop system board and many times fixes the problem of a black screen. After the 30 seconds re-connect your laptop to the wall power and hit the power button normally and see if the laptop comes back up.

Replace your battery.

3.Did this help you? If so Mo Bradley has one more quick tip to save your pocket.

I would like you to save on the high cost of replacement printer ink and I implore you not to buy Original Brand replacement ink. This is the rip off of the century and the Original Brand companies are not even ashamed. Try this website for ink which is mostly under $4.00 each (even HP ink) or if they don't have your printer model try some of the other suppliers of off brand printer ink. In the past I have used and They all have good quality off brand cartridges that will save you so much money.

I hope you find it very helpful.

Aug 22, 2011 | Acer Aspire AS5253BZ692 156 Laptop

1 Answer

It is kepp saying error error and showing red color please fix it we did not play for it a year

if you are having the 3 or 4 red lights that is what is know as the RED RING OF DEATH. it is a major problem with the xbox360. it was so bad that microsoft extended the warranty to three years. the three year warranty program ended for most people but they do still cover for a year. if you didn't have it for more than a year give microsoft a call and they'll fix it under warranty. that is your best option.

Jun 03, 2010 | Microsoft Xbox 360 Console

2 Answers

I got a new dell notebook and the microphone hasnt worked

your Dell us under warranty. Go to and work through the prompts to get them to honor your warranty and fix your microphone.

Sep 14, 2009 | Dell Inspiron 1525 Notebook

2 Answers

4 red lights

its called the RRoD (RED RING OF DOOM). NOTHING YOU CAN DO. Sned it to micosoft, they'll send you a brand new 360 for free.

Mar 25, 2009 | Microsoft Xbox 360 Console

2 Answers

Playstation 3 not reading any discs at all

iF any of those, then the station's laser eye could be blurry and/or scratched. the big thing is if the disc is durty and you wash it off, be shure 2 totally dry it off, or it WiLL FRY the inside cavity of the CD roller.

Jun 08, 2008 | Sony Playstation 3 (PS3) Console

1 Answer

No picture

their seems to be a lot of problems with the ps 3 and they are all basically the same most of the problems are due to the unit over heating i dont think they thought about this properly when making the unit as alot of them are having this problem if you have only had it 8 months it should still be under warranty so take it back and they will replace it for you if the place you got it from wont do this then you need to contact sony and tell them of the problem dont try taking the unit apart yourself as their is nothing you can do to fix the problem as the unit will need a new board as they are all seem to be getting fried this is happening alot if you tell them that you know people who have same problem eventually they will have to address this problem the should replace the unit for you sorry their isnt nothing you can do because it is hard to get hold of spares for these and they can be as expensive as a new one have you tried holding doen the on button untill you here a couple of beeps this resets the console if this dont solve your problem then get in touch with sony a quick as poss as taking the unit apart will void your warranty hope this is some help to you

Nov 15, 2007 | Sony Playstation 3 (PS3) Console

Not finding what you are looking for?
Canon PIXMA MP600 all-In-One InkJet Printer Logo

Related Topics:

151 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

old marine
old marine

Level 3 Expert

2143 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides