Question about Whirlpool GR448SS Electric Kitchen Range

2 Answers

Red to Green flashing lights on the console after power restored

Our range started flashing red to green lights back & forth very fast on our console after a power outage & power was restored. The eyes will come on but nothing else.


Posted by on

  • ranse Jun 30, 2009

    THIS IS A WHIRPLOOL GOLD ELECTRIC RANGE -GR448 XPS - NOT A REFRIGERATOR

    RW

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,200 Answers

Can I clarify your question before I troubleshoot this any further.

1) Are the lights still flashing on the range or are they now staying on all the time?

2) You say the eyes come on but the oven does not funtion - is this correct?

Thanks

Posted on Jun 30, 2009

  • 2 more comments 
  • Radio Code Pro
    Radio Code Pro Jun 30, 2009

    Hi



    Yes I understand it is an electric range. Does it have a panel displaying an error code?



    Thank you

  • Radio Code Pro
    Radio Code Pro Jun 30, 2009

    Also I would suggest you try unplugging it completely from the supply and then plug it back in to see if this causes a reset.

  • Radio Code Pro
    Radio Code Pro Jun 30, 2009

    If the oven does not heat at all the oven heating element may be blown from a sudden surge when the power came back on. This will cause the lights to flash indicating an error. To test this you would have to remove it and test it with a multimeter.



    The oven selector switch may also be faulty again only multimeter will tell

  • Radio Code Pro
    Radio Code Pro Jun 30, 2009

    Finally your problem may be related to a fault in the control panel itself or a blown relay which is stopping current to flow to the oven.

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,917 Answers

Hi,

Did the RCD tripping have anything to do with the freezer? You could have a faulty defrost heater, which means the freezer will not defrost at all.
Thanks

Posted on Jun 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My ps3 is dead!!!. flashing red light


Hello,

Follow the procedure below to fix the problem on your ps3,

1. Turn off Playstation®3.
2. Hold the power button down; the system will turn on and turn off once again.
3. Once the System has been shutdown, re-press you finger until you hear 2 consecutive beeps
4. When you hear the 2 beeps take finger off power button.
5. You will be prompted to plug in your controller via USB and then hit the PS button
6. The Recovery menu will pop up.

The current Recovery Menu supports:
• Restart System: Restarts the PLAYSTATION®3 System.
• Restore Default Settings: Reset all system settings back to default.
• Restore File System: Checks for corrupt/missing system files.
• Rebuild Database: Rebuilds the OS for the PLAYSTATION®3.
• Restore PS3 System: Fresh restore; Deletes everything and starts from Scratch.
• System Update: Update the PLAYSTATION®3 System.

Take care.

Jul 20, 2010 | Sony Playstation 3 (PS3) Console

1 Answer

My ps3 won't load the discs...


Hi, if it wont load your icons and freezes before your xmb, put it into safemode and try restoring the filing system. to get it into safemode...
hold down the power button while the console is in standby. the light will go from red to green.it will beep once flash green beep again, and then beep a third time. after the third beep the light will turn red.

once the light is red, take your finger off the power button and place it back on the power button. the light will go from red to green, beep once flash and then beep twice quickly. after it does the double beep, take your finge roff. the light will stay green and you'll get a screen asking you to connect the controller.

after connecting the controller, try option 3, or whichever option is restore filing system. this can possibly correct media loading and will 95% of the time fix the console when it freezes before loading up your icons(the xmb)

Thanks and take

Apr 19, 2010 | Sony Playstation 3 (PS3) Console

1 Answer

The intercom light on my GE 2-9451 phone is flashing between green and red


This is what is in the user manual about the ligth means
Red Someone else is using the line.

Flashing red fast Incoming call.
Green You’re using the line.
Flashing green Line on hold.
Flashing red Line on hold by other stations.
Flashing yellow Incoming call transfer

Dec 18, 2009 | Video Game Consoles & Games

3 Answers

The red light is blinking and it doesn't print.


There are actually some certain meaning on the red light and green light showing different information to user. The summaries are:
1) Green On, Red Off = Printer Ready.
2) Green Fast-Flashing, Red Fast-Flashing = Printer warm up.
3) Green Fast-Flashing, Red Off = Printer off-line.
4) Green Slow-Flashing, Red Off = Processing Data.
5) Green Off, Red On = Cover Opened, Toner Empty or Developer Unit / Drum unit missing.
6) Green Off, Red Fast-Flashing = Paper Jam or waiting for jam reset.
7) Green Off, Red Slow-Flashing = Paper Empty or Paper tray is not inserted.
8) Green Off, Red Off = Printer power is off.
9) Green Very-Slow-Flashing, Red Off = Printer in sleep mode.
10) Green (any condition above), Red Slow-Flashing = Toner low or paper empty.

So what is your printer condition? Better know what is going on your printer so can solve the problem.

Oct 02, 2009 | Kyocera FS-920 Laser Printer

2 Answers

Kyocera fS-920KX. Not printing


There are actually some certain meaning on the red light and green light showing different information to user. The summaries are:
1) Green On, Red Off = Printer Ready.
2) Green Fast-Flashing, Red Fast-Flashing = Printer warm up.
3) Green Fast-Flashing, Red Off = Printer off-line.
4) Green Slow-Flashing, Red Off = Processing Data.
5) Green Off, Red On = Cover Opened, Toner Empty or Developer Unit / Drum unit missing.
6) Green Off, Red Fast-Flashing = Paper Jam or waiting for jam reset.
7) Green Off, Red Slow-Flashing = Paper Empty or Paper tray is not inserted.
8) Green Off, Red Off = Printer power is off.
9) Green Very-Slow-Flashing, Red Off = Printer in sleep mode.
10) Green (any condition above), Red Slow-Flashing = Toner low or paper empty.

So what is your printer condition? Better know what is going on your printer so can solve the problem

YBC (/\)

Jun 01, 2009 | Kyocera FS-920 Laser Printer

1 Answer

Ps3 problem


if it wont load your icons and freezes before your xmb, put it into safemode and try restoring the filing system. to get it into safemode...

hold down the power button while the console is in standby. the light will go from red to green.it will beep once flash green beep again, and then beep a third time. after the third beep the light will turn red.

once the light is red, take your finger off the power button and place it back on the power button. the light will go from red to green, beep once flash and then beep twice quickly. after it does the double beep, take your finge roff. the light will stay green and you'll get a screen asking you to connect the controller.

after connecting the controller, try option 3, or whichever option is restore filing system. this can possibly correct media loading and will 95% of the time fix the console when it freezes before loading up your icons(the xmb)

May 03, 2009 | Sony Playstation 3 (PS3) Console

1 Answer

Ps3


if it wont load your icons and freezes before your xmb, put it into safemode and try restoring the filing system. to get it into safemode...

hold down the power button while the console is in standby. the light will go from red to green.it will beep once flash green beep again, and then beep a third time. after the third beep the light will turn red.

once the light is red, take your finger off the power button and place it back on the power button. the light will go from red to green, beep once flash and then beep twice quickly. after it does the double beep, take your finge roff. the light will stay green and you'll get a screen asking you to connect the controller.

after connecting the controller, try option 3, or whichever option is restore filing system. this can possibly correct media loading and will 95% of the time fix the console when it freezes before loading up your icons(the xmb)

insetad of restoring the filing system, restore the default settings ore restart the system

Mar 31, 2009 | Sony Playstation 3 (PS3) Console

1 Answer

Ps3 says cannot start the correct hard disk was not found


try safemode
hold down the power button while the console is in standby. the light will go from red to green.it will beep once flash green beep again, and then beep a third time. after the third beep the light will turn red.

once the light is red, take your finger off the power button and place it back on the power button. the light will go from red to green, beep once flash and then beep twice quickly. after it does the double beep, take your finge roff. the light will stay green and you'll get a screen asking you to connect the controller.

after connecting the controller, try option 3, or whichever option is restore filing system. this can possibly correct media loading and will 95% of the time fix the console when it freezes before loading up your icons(the xmb)

Mar 24, 2009 | Sony Playstation 3 (PS3) Console

2 Answers

Kyocera Ecosys FS 920


There are actually some certain meaning on the red light and green light showing different information to user. The summaries are:
1) Green On, Red Off = Printer Ready.
2) Green Fast-Flashing, Red Fast-Flashing = Printer warm up.
3) Green Fast-Flashing, Red Off = Printer off-line.
4) Green Slow-Flashing, Red Off = Processing Data.
5) Green Off, Red On = Cover Opened, Toner Empty or Developer Unit / Drum unit missing.
6) Green Off, Red Fast-Flashing = Paper Jam or waiting for jam reset.
7) Green Off, Red Slow-Flashing = Paper Empty or Paper tray is not inserted.
8) Green Off, Red Off = Printer power is off.
9) Green Very-Slow-Flashing, Red Off = Printer in sleep mode.
10) Green (any condition above), Red Slow-Flashing = Toner low or paper empty.

So what is your printer condition? Better know what is going on your printer so can solve the problem.

YBC (/\)

Mar 24, 2009 | Kyocera FS-920 Laser Printer

1 Answer

My ps3 doesnt work


if it wont load your icons and freezes before your xmb, put it into safemode and try restoring the filing system. to get it into safemode...

hold down the power button while the console is in standby. the light will go from red to green.it will beep once flash green beep again, and then beep a third time. after the third beep the light will turn red.

once the light is red, take your finger off the power button and place it back on the power button. the light will go from red to green, beep once flash and then beep twice quickly. after it does the double beep, take your finge roff. the light will stay green and you'll get a screen asking you to connect the controller.

after connecting the controller, try option 3, or whichever option is restore filing system. this can possibly correct media loading and will 95% of the time fix the console when it freezes before loading up your icons(the xmb)

Mar 19, 2009 | Sony Playstation 3 (PS3) Console

Not finding what you are looking for?
Whirlpool GR448SS Electric Kitchen Range Logo

Related Topics:

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Ismael Rodriguez...

Level 2 Expert

162 Answers

Cindy Wells

Level 3 Expert

5096 Answers

Are you a Whirlpool Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...