I have a Kenmore Elite HE3 model 8519504 dryer - it takes hours to dry a small load. I can see the drum is loose and there is some gray type insulation coming out (large strip that obviously goes around the drum). What needs to be done to make this work properly?

SOURCE: kenmore elite HE3

You need to check if the Spray Arms are knocking against an item in a basket. If the source of noise cannot be determined, run a program without plates or glassware. If the noises continue, let me know for further investigation.

SOURCE: Kenmore Elite HE3 Dryer clothes not dry after cycle

it sounds like a clog in vent.if yours vents up thru roof you may need to have a chimney sweep come out and sweep vent.check and make sure the vent hose is net kinked or full of lint.

SOURCE: My Kenmore Elite he3 is no longer drying clothes.

Hi
Please, the heater seems not working "
My Kenmore Elite he3 is no longer drying clothes", what I need to check or do? thank you.

Albert Getty

• 547 Answers
• Posted on Apr 20, 2009

SOURCE: drum turns...no heat

change the heating elament this is not hard to do it goes back the same way you take it out thank you for useing fixya
please rate me