Question about Dymo LetraTAG Thermal Label Printer
Thanks for your solution. just did as you suggested 'artu' and found a piece of tape inside. works a treat now.
Posted on Dec 13, 2007
I was having the exact same problem & had lost my user's manual (you can go on the Dymo.com website to download a replacement). The !!!!!!!!!! display means that there probably is a tape jam. Here's what the manual says:
*!!!!!!in the display indicates that the tape can not be transported *Press any key to return to normal display *Check if there is a tape jam. In that case, life out the cassette and carefully release jammed tape. Cut off excess tape and refit/replace the cassette *If there is no tape jam replace the batteries
Posted on Dec 07, 2007
Tips for a great answer:
Jul 27, 2011 | Dymo LetraTAG Thermal Label Printer
Oct 11, 2010 | Dymo LetraTag QX50 Thermal Label Printer
May 12, 2010 | Dymo LetraTAG Thermal Label Printer
Jul 31, 2009 | Dymo LetraTAG Thermal Label Printer
828 people viewed this question
Usually answered in minutes!