Question about Hotpoint 23 in. BFI62 Built-in Dishwasher

1 Answer

Hotpoint 7822 Dishwasher. The On/Off switch cover is broken and won't stay 'in'. Can I bypass this or is there another solution. It is 18+ yrs old but otherwise works well

Posted by on

  • di56125 Jun 26, 2009

    thanks for the quick reply - I will give it a go

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 508 Answers

Can you jb weld it into place get five minute dry jb weld rough up surfaces with sandpaper apply jb weld and tape into place till dry the use touch up pait to blend so it doesnt look jeryy rigged!!!

Posted on Jun 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hotpoint diswasher won't drain or switch off and is constantly flashing f-2 , model is FDYF 2100 K


1. Air gap / Drain hoses
If there is an air gap (located in the sink, near the faucet), check to see if it is clogged. Unscrew the top cap and see if there is anything blocking inside. Note: If there is no air gap installed, the dishwasher might not drain properly.

If the drain hose is clogged, the dishwasher would not drain. If there is an air gap installed, it is very common that a hose going from the air gap into the garbage disposer is clogged. Remove and clean the hose. Make sure to reattach the hose before starting the dishwasher.

Note: If you recently had a garbage disposer installed, it is common to overlook removing the drain plug.

2. Broken belt
Some dishwasher models use a belt to drive the pump. Replace the belt if found broken.

Note: Sometimes the belt would just come off the pump. Even though it might not be broken, it is recommended that you replace the belt, because it is probably too stretched out.

3. Pump
Some models have two impellers inside the pump - one, wash impeller, takes care of the wash cycles, the other, drain impeller, drains the water out. If the drain impeller is broken (broken blades, shaft), the dishwasher would not drain. Replace any broken pump components.

4. Drain solenoid
Some models (for example most GE dishwashers) use a drain solenoid to drain water out. Sometimes the solenoid gets stuck, preventing the water from draining out. Try to free up the solenoid. If unsuccessful, you might have to replace the pump assembly.

5. Motor
If the motor is stuck, it is sometimes possible to free it up by manually spinning the motor.

Replace the motor if defective.

6. Timer
Replace if defective (note: uncommon problem).
see the diagram attached, and proceed according.

God bless you7eebf0e2-88c0-4ac4-8998-f975a95ecca0.gif

May 24, 2013 | Hotpoint Dishwashers

1 Answer

Hotpoint dryer won't stay on


The belt is probably broken. Their is a broken belt switch which keeps the main wire winding from working if the belt is broken. To check for broken belt open the door and remove the screws holding down the top. Remove the top, then take the front off and inspect that puppy. Here is my crappy video:

Apr 27, 2013 | Dryers

1 Answer

The little wheels on the trays keep breaking. they are very expensive to replace. we are not sure how old the dishwasher is and are wondering should we replace it. it's a model 7822. has that model...


Hi,
That is not that hard to fix and you can easily buy the parts yourselfonline...

Here is a tip that will help you with the online buying...

How to Buy Appliance Parts Online

heatman101

Sep 22, 2010 | Hotpoint Dishwashers

1 Answer

Is there a micro switch on a dishwasher to let the water in hotpoint hydrocare super plus model no 7822 my machine dosent seem to fill


Most Dishwasher have a flote switch for the water level. You need to check it as well as the water inlet water valve.

Jul 04, 2010 | Dishwashers

1 Answer

When switched on is stuck permamently on the rinse cycle will not go onto any other program


The automatic timer is either broken or malfunctioning. You will need to order a new timer box which can fairly easily be switched out by yourself.

*NOTE* When you do this be sure the power is turned off at the breaker panel.

Dec 04, 2009 | Hotpoint 18 in. DC27 Slim-Line Built-in...

1 Answer

Wont go through cycles or drain the 3inches of water.Is getting power


turn on the dishwasher then go to your circuit breaker and, switch off the power to your dishwasher next: reach in to your dishwasher and remove the cover on your pump then remove any broken glass etc. that has fallen into the pump then put the cover back on and, close the dishwasher turn it on and, turn on the breaker you turned off earlier your machine should work again let me know how it goes...

May 02, 2009 | Hotpoint 24 in. HDA2000Z Built-in...

1 Answer

Hotpoint Superplus 7822 dishwasher


At the beginning of the cycle the dishwasher is attempting to pump out any residue water in the waste pipe and sump. It could be that the motor is sticking but you would probably also suffer from it not draining properly.
It may just be noisy pump. I have a similar model and it is also quite noisy but nothing extraordinary.
When the dishwasher is pumping out at the end of the washing cycle it may be quieter when there is water in the pump/pipes but then gets noisy as it 'pumps air'.

Jan 29, 2008 | Hotpoint 23 in. BFI62 Built-in Dishwasher

2 Answers

Dishwasher leak


must need a new air tube or worse still the air chamber has a split in it
clean machine out in w/shop and with sides off check out with a light to see where the leak is realy comming from it may be leaking from the top wash feed pipe leaking around pipe to tub
these do fracture there and water running down to base
if so replace feed pipe

Jan 21, 2008 | Hotpoint 24 in. HDA2000Z Built-in...

Not finding what you are looking for?
Hotpoint 23 in. BFI62 Built-in Dishwasher Logo

Related Topics:

229 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Dishwashers Experts

AcmeUK

Level 1 Expert

25 Answers

yadayada
yadayada

Level 3 Expert

75744 Answers

Brad Brown

Level 3 Expert

15557 Answers

Are you a Hotpoint Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...