Question about Royal Office Equipment & Supplies
Posted by Anonymous on
Pick out the jamming material bit by bit. You may have to "jog" the mechanism periodically to remove as much as possible. In the future, check often to prevent build up of shreds.
Posted on Feb 02, 2019
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: jammed shredder
First UNPLUG THE MACHINE.
Unscrew four (4) screws, two in front underneath top cover and two in back of top cover. BE careful not to disconnect any wires.
Rotate motor gear or belt in reverse to remove jam. Do not put oil on paper because it expands the paper thickness and only makes it worse.
Posted on Mar 03, 2009
If the blades rotate then the paper should go in...just be sure the blades are turning in the forward direction and not in reverse.Also make sure you lubricate the blades with shredder oil.
Posted on Aug 22, 2010
SOURCE: my royal paper shredder is
Normally try to run it in reverse while pulling the paper back out to assist the motor. If it won't even run in reverse then you will have to take it apart to manually clear the jam.
Posted on Oct 09, 2010
Try giving the EYES in the middle where you insert the paper a clean...if that dosnt work you may have lost the pcb inside ...give Royal a call at 1-800-524-0799 for parts assistance.
Posted on Oct 19, 2010
Tips for a great answer:
Nov 18, 2016 | Royal Office Equipment & Supplies
Nov 20, 2015 | Royal Office Equipment & Supplies
Nov 29, 2010 | Royal CIA 12X Shredder
Oct 16, 2010 | Royal 10X Shredder
Sep 10, 2010 | Royal 15MX Shredder
Jun 04, 2010 | Royal 150MX Cross-Cut Shredder
3,705 people viewed this question
Usually answered in minutes!